Seiko SRPH77 Owner Manual - Page 9

How to use the rotating bezel

Page 9 highlights

1 How to use the rotating bezel HOW TO USE By setting the rotating bezel beforehand, the elapsed time since the start of an event can be measured. 1 At the start of the event, for which you want to measure the elapsed Example: When you start diving at 10:10 am. time (for example, when you start diving), rotate the bezel so that the mark on the bezel is Align the mark with the minute hand aligned with the minute hand. * The rotating bezel is designed to rotate only counterclockwise. Rotating direction of the bezel Do not forcibly rotate it clockwise. "[One-Way rotating bezel]" → P.30 2 Read the graduation on the rotating bezel to which the Example: After 20 minutes has elapsed minute hand is pointing. The graduation on the rotating bezel to which the minute hand is pointing indicates the elapsed time. Elapsed time * The above illustration is provided as an example, therefore it may not be exactly the same as your watch. EN 29 Daily care 2 ● The watch requires good daily care • Do not wash the watch when its crown is in the extended position. • Wipe away moisture, sweat or dirt with a soft cloth. • After soaking the watch in seawater, be sure to wash the watch in clean pure water and wipe it dry carefully. Do not pour running water directly from a faucet onto the watch. Put some water into a bowl first, and then soak the watch in the water to wash it. * If your watch is rated as "Non-water resistant" or "water resistant for everyday life," do not wash the watch. "Performance and type" → P.32 ● Turn the crown from time to time • In order to prevent corrosion of the crown, turn the crown from time to time. • The same practice should be applied to a screw down crown. "Screw down crown" → P.17 TO PRESERVE THE QUALITY OF YOUR WATCH EN 31 [One-Way rotating bezel] As the evaluation of the remaining air in your cylinder is based on the information of the elapsed time of the dive, 1 the rotating bezel for a diver's watch is designed to rotate only counterclockwise, so that the watch is prevented from displaying the elapsed time shorter than it actually is. HOW TO USE b CAUTION Make sure that you check the correct remaining amount of air in your cylinder before diving. Use the display of the elapsed time by the rotating bezel only as a guide during diving. EN 30 Performance and type The case back shows the caliber and performance of your watch 2 Water resistant performance TO PRESERVE THE QUALITY OF YOUR WATCH 4R35-0000 Magnetic resistant performance Case Number • Water resistant performance • Case Number The number to identify the type of your watch. • Magnetic resistant performance Please refer to P.34 and P.35. * The above illustration is provided as an example, therefore it may not be exactly the same as your watch. EN 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

How to use the rotating bezel
By setting the rotating bezel beforehand, the elapsed time since the start of an event can be measured.
Example: When you start diving at 10:10 am.
Align the
mark
with the minute hand
Rotating direction of
the bezel
Example: After 20 minutes has elapsed
Elapsed time
*
The above illustration is provided as an example, therefore it may not be exactly the same as your watch.
1
At the start of the event, for which
you want to measure the elapsed
time (for example, when you start
diving), rotate the bezel so that
the
mark on the bezel is
aligned with the minute hand.
*
The rotating bezel is designed to rotate only
counterclockwise.
Do not forcibly rotate it clockwise.
“[One-Way rotating bezel]”
P.30
2
Read the graduation on the
rotating bezel to which the
minute hand is pointing.
The graduation on the rotating bezel to
which the minute hand is pointing indicates
the elapsed time.
EN
29
1
HOW TO USE
[One-Way rotating bezel]
As the evaluation of the remaining air in your cylinder is based on the information of the elapsed time of the dive,
the rotating bezel for a diver’s watch is designed to rotate only counterclockwise, so that the watch is prevented
from displaying the elapsed time shorter than it actually is.
b
CAUTION
Make sure that you check the correct remaining amount of air in your cylinder before diving.
Use the display of the elapsed time by the rotating bezel only as a guide during diving.
EN
30
1
HOW TO USE
Daily care
The watch requires good daily care
Do not wash the watch when its crown is in the extended position.
Wipe away moisture, sweat or dirt with a soft cloth.
After soaking the watch in seawater, be sure to wash the watch in clean pure water and wipe it dry
carefully.
Do not pour running water directly from a faucet onto the watch. Put some water into a bowl first, and
then soak the watch in the water to wash it.
*
If your watch is rated as “Non-water resistant” or “water resistant for everyday life,” do not wash the watch.
“Performance and type” → P.32
Turn the crown from time to time
In order to prevent corrosion of the crown, turn the crown from time to time.
The same practice should be applied to a screw down crown.
“Screw down crown” → P.17
EN
31
2
TO PRESERVE THE QUALITY OF YOUR WATCH
Performance and type
The case back shows the caliber and performance of your watch
4
R
3
5
-
0
0
0
0
Water resistant performance
Case Number
Magnetic resistant
performance
Water resistant performance
Case Number
The number to identify the type of your watch.
Magnetic resistant performance
Please refer to P.34 and P.35.
*
The above illustration is provided as an example, therefore it may not be exactly the same as your watch.
EN
32
2
TO PRESERVE THE QUALITY OF YOUR WATCH