Seiko SSK001 Owner Manual - Page 12

C C Type 2 TO PRESERVE THE QUALITY OF YOUR WATCH ● How to wear or take off the watch 1 While pressing the push buttons on both sides of the flap, pull the band out of the movable loop and fixed loop. Then open the clasp. Buckle 2 Place the tip of the band into the movable loop and fixed loop, and fasten the clasp by pressing the frame of the buckle. Fixed loop Movable loop Push button Flap EN 41 3 Pull the pin out of an adjustment hole of the band. Slide the band to adjust its length and 4 Fasten the flap. find an appropriate hole. Place the pin into the 2 hole. Pin Adjustment hole Adjustment hole Pin TO PRESERVE THE QUALITY OF YOUR WATCH ● How to adjust the length of the band 1 2 While pressing the push buttons on both sides of the flap, pull the band out of the movable Press the push buttons again to unfasten the flap. 2 loop and fixed loop. Then open the clasp. Buckle Fixed loop Movable loop Push button Flap EN 42 How to use an easy adjust type clasp Some bands are provided with an easy adjust type clasp for fine adjustment of the band's length. If the clasp of the watch you purchased is as follows, please refer to the following instructions. 2 * The band can be lengthened by up to about 5 mm. This is useful if the band feels too tight or is uncomfortable for some reason. TO PRESERVE THE QUALITY OF YOUR WATCH TO PRESERVE THE QUALITY OF YOUR WATCH EN 43 EN 44