Seiko SSK003 Owner Manual - Page 11

TO PRESERVE THE QUALITY OF YOUR WATCH TO PRESERVE THE QUALITY OF YOUR WATCH ● Silicone band • As for material characteristics, the band is easily dirtied, and may be stained and discolored. 2 Wipe off dirt with a wet cloth or cleaning tissue. • Unlike bands of other materials, cracks may result in the band being cut. Take care not to damage the band with an edged tool. Notes on skin irritation and allergy Skin irritation caused by a band may result from various factors such as allergy to metals or leathers, or skin reactions against friction on dust or the band itself. Notes on the length of the band Adjust the band to allow a little clearance with your wrist to ensure proper airflow. When wearing the watch, leave enough room to insert a finger between the band and your wrist. How to use tri-fold type clasp for leather band (Special clasps) There are 3 types of special clasps as described below; If the clasp of the watch you purchased is one of them, please refer to the indications. 2 A A Type → P.39 C C Type → P.41 B B Type → P.40 EN 37 A A Type 2 1 Lift up the clasp to release the buckle. Buckle Fixed loop Flap Movable loop 2 Open the flap. 3 Remove the pin from the adjustment hole. Slide the band left and right, and reinsert the pin into the adjustment hole at an appropriate length. Pin Adjustment hole 4 Fasten the flap. * Do not push the flap in too hard. TO PRESERVE THE QUALITY OF YOUR WATCH EN 39 * When fastening the clasp, insert the tip of the band into the movable loop and fixed loop, and then, securely tighten the clasp. EN 38 B B Type 2 TO PRESERVE THE QUALITY OF YOUR WATCH 1 While pressing the push buttons on both sides of the flap, lift to open the clasp. Push button 2 Remove the pin from the adjustment hole. Slide the band left and right, and insert the pin into the adjustment hole at an appropriate length. Push the buckle and fasten the clasp. Buckle Adjustment hole Pin EN 40