Seiko V195 Manual - Page 23

English Troubles The STOPWATCH hands do not return to the 0 position when the stopwatch is reset. Although another time zone is not selected by using the World Time function, the alarm/world time sub dial time is not set at exactly the same time as the main dial time. Although the alarm time has been set, the alarm does not sound at the set time. Possible causes Affected by external sources, or because the internal IC had been reset, the stopwatch hand positions have moved out of correct alignments. The world time preliminary position adjustment has not been performed. The alarm/world time sub dial time has been set to another time zone than main dial time by using the world time function. The inner surface of the glass is clouded. The date changes during the day. Moisture has entered the watch because the gasket has deteriorated. The time is set 12 hours ahead of or behind the correct time. 46 Solutions Adjust the STOPWATCH hands to the 0 position by following the instructions in TIME SETTING AND HAND POSITION ADJUSTMENT. Reset the time for main dial and alarm/world time sub dial. Use the world time function to select the same time zone as the current time in the main dial. Contact the retailer from whom the watch was purchased. Reset the time correctly, referring to TIME SETTING AND HAND POSITION ADJUSTMENT. • In the event of any other problem, please contact the retailer from whom the watch was purchased. 47 English