Seiko V657 Manual - Page 14
Necessary procedure after battery change, CROWN - movement
View all Seiko V657 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
English Necessary procedure after battery change q When the battery is replaced with a new one, the information stored in the built-in IC does not correspond with the time actually displayed. Before using the watch, therefore, be sure to reset the circuit following the procedure below. * In case any of the hands should move improperly, follow the procedure below to adjust the hand movement. CROWN w Pull out to second click. A « B A and B w A w Press and hold at the same time for 2 seconds. * STOPWATCH second hand turns half a revolution counterclockwise and then returns to where it was, while STOPWATCH 1/10 second hand turns a full revolution clockwise and stops. Press repeatedly to reset STOPWATCH 1/10 second hand to "0" position.** ** The hands move quickly if the respective buttons are kept pressed. B w CROWN Press repeatedly to reset STOPWATCH second and minute hands to "0" position.** Turn to set the time, and then push back in to normal position. 14