Sennheiser EK 1039 Instructions for Use - Page 11
Putting the receiver into operation, Inserting the batteries or the accupack, Charging the accupack
View all Sennheiser EK 1039 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Putting the receiver into operation Putting the receiver into operation Inserting the batteries or the accupack For powering the diversity receiver, you can either use two 1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack. For daily use, we recommend using the supplied BA 2015 accupack. The accupack can be charged in the L 2015 charger without having to be removed from the device. ̈ Open the battery compartment by pushing the two catches A in the direction of the arrows and open the cover 0. ቫቭ ቫ ቧ ̈ Insert the BA 2015 accupack or the two batteries as shown above. Please observe correct polarity when inserting the accupack/batteries. ̈ Close the battery compartment by pressing on the center of the cover 0. The battery compartment cover 0 locks into place with an audible click. Charging the accupack To charge the BA 2015 accupack installed in the receiver: ̈ Insert the diversity receiver into the L 2015 charger. The receiver switches off and the accupack is being charged. For more information on charging the BA 2015 accupack, refer to the instruction manual for the L 2015 charger. Never switch on the receiver during charging because otherwise the accupack will not be charged correctly. The L 2015 charger can only charge the BA 2015 accupack. Standard batteries (primary cells) installed in the receiver or individual rechargeable battery cells cannot be charged. Connecting headphones ̈ Connect headphones with an impedance of at least 8 Ω to the 3.5 mm jack ባ socket 2. ECnghli4sh 10 | Tourguide 1039