Sennheiser EM 100 G4 Instruction manual ew 100 G4 PDF - Page 74
Current List, Reset, Performing multi-channel frequency setup, Using the EM 100 G4
View all Sennheiser EM 100 G4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Using the EM 100 G4 ▷ Press the SET button to save your selection and synchronize the selected frequency with the transmitter at a later point (see "Synchronizing devices"). or ▷ Press the SYNC button to synchronize the selected frequency with the transmitter immediately. Current List ▷ Select Current List to show the list of unused frequencies from the last scan. Reset ▷ Select Reset List to delete the list of unused frequencies. Performing multi-channel frequency setup To perform the automatic frequency setup for multiple receivers (max. 12) simultaneously: ▷ Connect all of the receivers to one network. See "Creating a data network". ▷ Open the Easy Setup menu item on one of the receivers. This receiver is the master. You can choose any receiver to be the master. ▷ Perform the frequency scan on the master receiver as described above. After the scan, the display panels of the other receivers will display the message Assign New Frequency?. Receivers with non-compatible frequency ranges will display the message Unassignable Frequency!. ▷ Select an unused frequency for the first receiver on the master receiver. ▷ Press the SET button on the receiver that you would like to assign this frequency to. ▷ Use this procedure to assign a frequency to each connected receiver, one after another. ▷ For the last step, assign a frequency to the master receiver. This completes the multi-channel frequency setup. 73