Sennheiser EW-DX SK / SKM-S Base Set Product specification - EW-DX SK-SKM-S BA - Page 5

PRODUCT SPECIFICATION (V1.5) 5/10 Evolution Wireless Digital EW-DX SK-SKM-S BASE SET | Base Set SPECIFICATIONS System Audio link frequency ranges Bluetooth® Low Energy (BLE) frequency range Audio frequency response Audio THD Dynamic range System latency Operating temperature Relative humidity Q1-6 R1-6 R4-9 S1-7 S4-7 S7-10 U1/5 V3-4 Y1-3 470.2 - 526 MHz 520 - 576 MHz 552 - 607.8 MHz 606.2 - 662 MHz 630 - 662 MHz 662 - 693.8 MHz 823.2 - 831.8 MHz & 863.2 - 864.8 MHz 925.2 - 937.3 MHz 1785.2 - 1799.8 MHz 2402 - 2480 MHz 20 Hz - 20 kHz (-3 dB) @ 3 dBfs ≤ -60 dB for 1 kHz @ -3 dBfs input level 134 dB 1.9 ms -10 °C - +55 °C (14 °F - 131 °F) 5 - 95 % (non-condensing) EW-DX SKM-S (Handheld Transmitter) Input voltage 2.0 - 4.35 V Input current < 300 mA Power supply 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth 200 kHz Transmit power (radiated) Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) LD mode: 10 mW ERP BLE: max. 10 mW EIRP Dimensions (ø x l) (incl. MMD 835 microphone 50 x 268 mm (1.97" x 10.55") module) (without microphone module) 40 x 200 mm (1.57" x 7.87") Weight (without batteries) (incl. MMD 835 microphone approx. 304 g (0.67 lbs) module) (without microphone module) approx. 195 g (7.14 lbs) EW-DX EM 2 (Rack Receiver) Input voltage 11 - 13 V ⎓ or PoE IEEE 802.3af Class 0 (CAT5e or higher) Input current ≤ 1 A Transmit power (radiated) BLE: max. 10 mW EIRP Audio output power 18 dBu max. Headphone output 2x 70 mW @ 32 Ω Ethernet RJ-45 socket, IEEE802.3 100Base-TX (half+full duplex) 10Base-T (half+full duplex) (CAT5e or higher) Dimensions 212 x 44 x 189 mm (8.35" x 1.73" x 7.44") Weight approx. 1000 g (2.2 lbs) (without antennas and power supply) EW-DX SK (Bodypack Transmitter) Input voltage 2.0 - 4.35 V Input current < 300 mA Power supply 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth 200 kHz Transmit power (radiated) Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) LD mode: 10 mW ERP BLE: max. 10 mW EIRP Dimensions (without anten- 63.5 x 85 x 20 mm na) (2.5" x 3.35" x 0.79") Weight (without batteries) approx. 115-120 g (0.26-0,27 - lbs)