Sennheiser PXC 360 BT Instructions for Use - Page 19

Using the PXC 360 BT ᕣ ² Switching the TalkThrough function on/off The PXC 360 BT provide excellent attenuation of ambient noise. The TalkThrough function allows you to communicate undisturbed with other people without having to remove the headphones even when NoiseGard is switched on. To switch the TalkThrough function on: ̈ Briefly press the NoiseGard button ». The LED ቢ lights up red. The TalkThrough function is switched on. To switch the TalkThrough function off: ̈ Briefly press the NoiseGard button ». The LED ቢ goes off. The TalkThrough function is switched off. When the TalkThrough function is switched on, you cannot listen to music. Switching the Bluetooth function on/off Via the Bluetooth interface, the headphones can be connected to a wide variety of Bluetooth enabled devices. To switch the Bluetooth function on: ̈ Press the Bluetooth button ² and keep it pressed until the LED ቢ flashes 3 times blue. The Bluetooth function is switched on. To switch the Bluetooth function off: ̈ Press the Bluetooth button ² and keep it pressed until the LED ቢ flashes 3 times red. You hear a descending beep. The Bluetooth button ² goes off. The LED ቢ flashes blue and the Bluetooth function is switched off. Changing the volume The PXC 360 BT allow you to change the volume of the audio signal: Button Duration Function Button Incrementally increases the volume Continuously 1 s increases the volume Duration Function Incrementally reduces the volume Continuously 1 s reduces the volume If you press the respective button briefly, the volume is changed incrementally; if you hold down the button, the volume is changed continuously. When the minimum or maximum volume is reached, you hear an acknowledgement tone. 18