Sennheiser SL DW HEADMIC SET System Specification - SpeechLine Digital Wireles - Page 2

System, SL MCR DW, SL Rack Receiver DW, Power supply units for SL Rack Receiver DW

Page 2 highlights

SYSTEM SPECIFICATION (V3.2) 2/28 SpeechLine Digital Wireless SPECIFICATIONS System AF frequency response Dynamic range THD (1 kHz) Audio sampling Signal-to-noise ratio Encryption RF frequency ranges Modulation Transmission method Latency Relative air humidity Temperature range* 20 to 20,000 Hz > 120 dB(A) typ. 0.1 % 24 bit/48 kHz > 90 dB(A) AES 256 EU: USA: Brazil: Taiwan: Japan: 1,880 to 1,900 MHz 1,920 to 1,930 MHz 1,910 to 1,920 MHz 1,880 to 1,895 MHz 1,893 to 1,906 MHz GFSK with back channel TDMA, space diversity 19 ms max. 95 % Operation: Storage: -10 °C to 55 °C (14 °F to 131 °F) -20 °C to 70 °C (-4 °F to 158 °F) * The temperature range is influenced by the battery characteristics SL MCR DW RF sensitivity RF output power back channel Network protocol Power supply Audio outputs Weight Dimensions Operating temperature Storage temperature Relative air humidity < -90 dBm adaptive or manual, up to 250 mW (country-specific) Media Control Protocol, UDP IPv4 (DHCP, Manual)/IPv6, mDNS (switchable) PoE IEEE 802.3af Class 3 One 3-pin socket (suitable for Phoenix Contact MCVW 1.5-3-ST-3.81) Two Dante™ Digital Audio Network sockets (RJ-45) 650 g (incl. wallmount) 560 g (without wallmount) 180 x 180 x 45 mm (incl. wallmount) -10 °C to +45 °C (14 °F to 113 °F) -20 °C to +70 °C (-4 °F to 158 °F) max. 95 % SL Rack Receiver DW RF sensitivity RF output power back channel XLR output level, balanced RCA output level, unbalanced Audio effects < -90 dBm adaptive, up to 250 mW (country-specific) max. +18 dBu max. +6 dBu Low cut: -3 dB at 120 Hz Equalizer: 7-band graphic equalizer with sound presets Display Network protocol Power supply Current consumption AF connection sockets Antenna sockets Network sockets DC socket for power supply Weight Sound profiles: - female voice - male voice - instrument/ media OLED Media Control Protocol, TCP/IP IPv4 (DHCP, manual)/ IPv6 12 V DC 350 mA XLR/2 x RCA 2 x reverse SMA RJ-45 hollow jack approx. 828 g (1.83 lbs) Power supply units (for SL Rack Receiver DW) Nominal input voltage Power frequency Input current Nominal output voltage Standby power consumption Energy efficiency level Operating temperature Storage temperature Relative air humidity Weight NT 12-4C NT 2-3 100 to 240 V AC 50 or 60 Hz max. 120 mA 12 V DC ≤ 0.3 W V IV -10 °C to 55 °C (14 °F to 131 °F) -20 °C to +70 °C (-4 °F to 158 °F) max. 95 % approx. 100 g approx. 105 g (0.22 lbs) (0.23 lbs)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

SYSTEM SPECIFICATION (V3.2)
SpeechLine Digital Wireless
2/28
SPECIFICATIONS
System
AF frequency response
20 to 20,000
 
Hz
Dynamic range
>
 
120
 
dB(A)
THD (1
 
kHz)
typ. 0.1
 
%
Audio sampling
24 bit/48
 
kHz
Signal-to-noise ratio
>
 
90
 
dB(A)
Encryption
AES 256
RF frequency ranges
EU:
USA:
Brazil:
Taiwan:
Japan:
1,880 to 1,900
 
MHz
1,920 to 1,930
 
MHz
1,910 to 1,920
 
MHz
1,880 to 1,895
 
MHz
1,893 to 1,906
 
MHz
Modulation
GFSK with back channel
Transmission method
TDMA, space diversity
Latency
19
 
ms
Relative air humidity
max. 95
 
%
Temperature range*
Operation:
Storage:
-10 °C to 55 °C
(14 °F to 131 °F)
-20 °C to 70 °C
(-4 °F to 158 °F)
* The temperature range is influenced by the battery
characteristics
SL MCR DW
RF sensitivity
< -90 dBm
RF output power back
channel
adaptive or manual,
up to 250 mW
(country-specific)
Network protocol
Media Control Protocol,
UDP IPv4 (DHCP, Manual)/IPv6,
mDNS (switchable)
Power supply
PoE IEEE 802.3af Class 3
Audio outputs
One 3-pin socket
(suitable for Phoenix Contact
MCVW 1.5-3-ST-3.81)
Two Dante™ Digital Audio
Network sockets (RJ-45)
Weight
650 g (incl. wallmount)
560 g (without wallmount)
Dimensions
180 x 180 x 45 mm
(incl. wallmount)
Operating
temperature
–10 °C to +45 °C
(14 °F to 113 °F)
Storage
temperature
–20 °C to +70 °C
(–4 °F to 158 °F)
Relative air
humidity
max. 95 %
SL Rack Receiver DW
RF sensitivity
<
 
-90
 
dBm
RF output power back
channel
adaptive, up to 250
 
mW
(country-specific)
XLR output level,
balanced
max. +18
 
dBu
RCA output level,
unbalanced
max. +6
 
dBu
Audio effects
Low cut:
Equalizer:
Sound pro-
files:
-3
 
dB at 120  
Hz
7-band graphic
equalizer with
sound presets
- female voice
- male voice
- instrument/
media
Display
OLED
Network protocol
Media Control Protocol,
TCP/IP IPv4 (DHCP, manual)/
IPv6
Power supply
12
 
V
 
DC
Current consumption
350
 
mA
AF connection sockets
XLR/2 x RCA
Antenna sockets
2 x reverse SMA
Network sockets
RJ-45
DC socket for power
supply
hollow jack
Weight
approx. 828
 
g (1.83
 
lbs)
Power supply units (for SL Rack Receiver DW)
NT  
12-4C
NT  
2-3
Nominal input voltage
100 to 240
 
V AC
Power frequency
50 or 60
 
Hz
Input current
max. 120
 
mA
Nominal output voltage
12
 
V DC
Standby power
consumption
 
0.3
 
W
Energy efficiency level
V
IV
Operating temperature
-10
 
°C to 55
 
°C
(14
 
°F to 131
 
°F)
Storage temperature
-20
 
°C to +70
 
°C
(-4
 
°F to 158
 
°F)
Relative air humidity
max. 95
 
%
Weight
approx. 100
 
g
(0.22
 
lbs)
approx. 105  
g
(0.23  
lbs)