Sennheiser SZI 1015 Instructions for Use - Page 9

Accessoires GZL 1019 A1 BNC/BNC co-axial cable For connecting a radiator to the SI 1015, SI 29-5 or SI 1029 transmitters. Length: 1 m. GZL 1019 A5 BNC/BNC co-axial cable For connecting a radiator to the SI 1015, SI 29-5 or SI 1029 transmitters. Length: 5 m. GZL 1019 A10 BNC/BNC co-axial cable For connecting a radiator to the SI 1015, SI 29-5 or SI 1029 transmitters. Length: 10 m. GZV 1019 BNC coupler for connecting two GZL 1019 A1, -5, -10 co-axial cables. GA 1031-AM blank module For 19" rack mounting (with BNC sockets). GA 1031-CC blank module For 19" rack mounting. For the AF connection, use a standard XLR-3 connection cable of the required length. Note: "IR Planning Brochure" from Sennheiser Information on the many possible areas of application of Sennheiser infra-red audio transmission systems can be found in the "IR Planning Brochure". This brochure gives detailed information on infra-red transmission technology and contains application examples as well as possible product combinations and overviews for infra-red system planning. Since we are continually trying to improve our products it may happen that technical alterations are made on the described products after this manual has gone to press. We apologise for any inconvenience. 16 Technical Data SI 1015 Operating voltage Current consumption Terminating impedance of the RF outputs Carrier frequency 1 Carrier frequency 2 Inputs Input sensitivity RF outputs Modulator 24 - 35 V DC (via NT 1015) < 140 mA 50 Ω 2.3 MHz 2.8 MHz 2 x XLR-3, balanced 50 mV - 5 V 2 x BNC, in parallel with barrier strip SZI 1015 Number of transmitting diodes Average radiating power Wavelength of radiated infra-red light Carrier frequency range RF input level Inputs / outputs Threshold voltage for automatic on/off function Operating voltage Current consumption Stand-by Dimensions in mm Weight Power radiator 66 2 W approx. 880 nm 30 kHz - 6 MHz 50 mV - 3 V / approx. 5 kΩ BNC sockets / barrier strip 50 mV 25-35 V DC via NT 1015 plug-in mains unit or via SI 1015 modulator 0.75 A at 25 V max. 60 mA approx. 250 x 100 x 80 approx. 1.3 kg NT 1015 Mains voltage Output voltage Output current Plug-in mains unit 100 - 240 V AC without switching 29 V DC 1.7 A, for powering an SI 1015 modulator and two SZI 1015 power radiators or an SI 1015 modulator and one SZI 1029-24 high power radiator 17