Sennheiser Set 830-TV Instructions for use - Page 11

Putting the Set 830-TV into operation A Connecting the transmitter to a headphone socket ̈ Plug the other end of the audio con- G nection cable F into the head- F phone socket on your sound source. Is the plug on the audio connection cable too small for the headphone socket? ̈ Plug the adapter to ¼" (6.3 mm) jack socket G onto the audio connection cable F. ̈ Adjust the volume of the headphone socket on your sound source to a medium level. This improves the quality of cordless sound transmission. For detailed information, please refer to the instruction manual of your sound source (e.g. TV). Note: With most TVs, the headphone socket is located at the front or sides. B Connecting the transmitter to an RCA socket ̈ Plug the adapter for RCA socket H onto the audio con- H nection cable F. F ̈ Connect the red connector of the adapter H to the red RCA socket R of your sound source. ̈ Connect the white connector of the adapter H to the white or black RCA socket L of your sound source. Notes: - With most TVs, the RCA socket is located at the rear. If your TV has several RCA sockets, use the socket RCA output. 8