Sennheiser XSW-D INSTRUMENT BASE SET Instruction manual - XS Wireless Digital - Page 19
The status LEDs remain green once the transmitter and receiver are
View all Sennheiser XSW-D INSTRUMENT BASE SET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Operation Connecting the microphone to the transmitter ► Operation ► ▷ Plug your microphone's jack plug into the jack socket on the transmitter. ▷ Insert the transmitter into the belt clip. ▷ Fasten the belt clip to your clothes, for example on your belt or waist- band. Connecting the receiver to a mixing console ▷ Plug the receiver into the XLR input of a channel on your mixing con- sole. Switching on the transmitter and receiver ► ▷ Briefly press the button on the transmitter and the button on the receiver. The status LEDs indicate the charge level for four seconds. ▷ During these four seconds, check that the transmitter and receiver are sufficiently charged. > 75% 5% - 75% < 5% If the status LED remains red, you should charge the rechargeable battery first. If the status LED flashes red, the charge level is too low. You have to charge the rechargeable battery first (see „Charging the rechargeable battery"). After four seconds, the status LED starts flashing green. The flashing indicates that a wireless connection is being established. The status LEDs remain green once the transmitter and receiver are connected. If the status LEDs do not remain green, either the charge level is below 15% (see „Checking the charge level during use") or the transmitter and receiver are not paired (see „Pairing"). 18