Sharp 172A-W Operation Manual - Page 19
Adjusting the screen display and speaker volume
UPC - 074000046115
View all Sharp 172A-W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English Français Deutsch Italiano Adjusting the screen display and speaker volume For analog signal 1. First perform an automatic adjustment. (p.21) 2. Perform manual adjustment where necessary. (p.22) For digital signal [LL-172G] The monitor can generally be used without adjustment. If necessary perform manual adjustment. (p.22) Note: - All adjustments will be saved even after turning the power off. Resetting all adjustment values All adjustment values can be returned to their original ex-factory values in one command. 1. Turn off the monitor power. 2. Press the MENU button and the / MODE button simultaneously, and while doing this press the power button (i.e. turn the power on). Continue to press the buttons until [ALL RESET] appears on the screen. Reset is complete when the displayed message disappears. Notes: - While [ALL RESET] is displayed, the control buttons are disabled. - It is not possible to reset values when the adjustment lock is in place. Remove the adjustment lock before attempting to operate control buttons. Adjustment lock function By disabling the control buttons (i.e. setting the lock) any attempted changes to adjusted values will be voided. 1. Turn off the monitor power. 2. While pressing the MENU button, press the power button (i.e. turn the power on). Continue to press the buttons until [ADJUSTMENT LOCKED] appears on the screen. The lock is set when the message is displayed. Note: - When the lock is in place, all buttons other than the power button are disabled. Adjustment lock release 1. Turn off the monitor power. 2. While pressing the MENU button, press the power button (i.e. turn the power on). Continue to press the buttons until [ADJUSTMENT UNLOCKED] appears on the screen. The lock is released when the message is displayed. Adjusting the backlight 1. Without the OSD Menu being displayed, press the or the button. 2. Check that [BRIGHT] is selected. If it is not selected, press the / MODE button and select [BRIGHT]. ADJUSTMENT Menu reset Settings of items in the ADJUSTMENT Menu (CLOCK, PHASE, H-POS, V-POS) can be returned to their original ex-factory values. 1. Turn on the monitor power. 2. Press the MENU button and the button simultaneously. When [RESET] appears on the screen, the reset is complete. 3. Adjust by pressing the button (darker) or button (lighter). Note: - On Screen display for adjustment disappears several seconds after the last operation. Notes: - While [RESET] is displayed, the control buttons are disabled. - It is not possible to reset values when the adjustment lock is in place. Remove the adjustment lock before attempting to operate control buttons. Español English 19