Sharp 25NM100 25NM100 Operation Manual - Page 19

Parent Control (V-CHIP Operation Continued) [3] ACTIVATE ON TO TURN ON V-CHIP BLOCK 1 Press CH UP (8) or DOWN (9) to move the " " mark to "STATUS", then press VOL (+) or (-) to activate ON the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.) → 2 Press MENU, then "INPUT SECRET No." will be displayed. 3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD. 4 Press MENU and SECRET No. is registered. L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated. 1 "V-CHIP HAS BEEN ACTIVATED" will be displayed if you watch the program with Program Rating data the same as you configured. NOTE: • "V-CHIP HAS BEEN ACTIVATED" will not be displayed if STATUS is not configured to "ON". 2 Press MENU, then "INPUT SECRET No." will be displayed. 3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then V-CHIP BLOCK will temporarily be canceled. If the wrong SECRET No. is chosen, "SECRET No. IS INCORRECT" will be displayed. Input the SECRET No. again in this case. NOTE: • If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again. 19