Sharp 27NS100 25NS100|25NS180|27NS100|27NS180 Operation Manual - Page 30
Ch Up, Remote Keypad
View all Sharp 27NS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Set Up (Continued) 6 Press MENU to exit. NOTE: • Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN "OFF". • While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the BLUE SCREEN is turned on. L PERSONAL PREFERENCE By setting the PERSONAL PREFERENCE channels in advance, you can select your favorite channels easily. PERSONAL PREFERENCE 1 Press MENU to access MAIN MENU screen. 2 Press CH UP (8) or DOWN (9) to move the " " mark to "SET UP". REMOTE KEYPAD VOLUME (+)/(-) CHANNEL UP (8)/ DOWN (9) MENU → 3 Press VOL (+) or (-) to access SETUP mode, then press CH UP (8) or DOWN (9) to move the " " mark to "PERSONAL PREFERENCE". (MAIN MENU screen) → 4 Press VOL (+) or (-) to select PERSONAL PREFERENCE select mode in which you can program four favorite channels, in four different categories. (total of 16 channels) (SETUP mode) 5 Press CH UP (8) or DOWN (9) to move the " " mark to the desired position. (PERSONAL PREFERENCE select mode) 6 Press REMOTE KEYPAD on the Remote to input the CHANNEL Number into the memory. Example: 125 - Press "100" followed by "2" and then "5". 7 Repeat steps 4 - 6 to input the next CHANNEL Number. 30 26-31 25&27NS100/180 1.4 30 6/1/00, 2:11 PM