Sharp 32UF6 32UF5|32UF6 Operation Manual - Page 31
Press, to exit., When the BLUE SCREEN is set
![]() |
View all Sharp 32UF6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Set Up (Continued) 6 Press MENU to exit. When the BLUE SCREEN is set to "ON" No signal Blue screen Power turns off automatically after 15 minutes Standby mode Note: • Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN "OFF". • While INPUT1, 2 or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if BLUE SCREEN is turned on. 31
![](/manual_guide/products/sharp-32uf5-32uf532uf6-operation-manual-ad923f2/31.png)
31
6
Press
MENU
to exit.
When the BLUE SCREEN is set to
“
ON
”
Note:
•
Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN
“
OFF
”
.
•
While INPUT1, 2 or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if
BLUE SCREEN is turned on.
Set Up (Continued)
No signal
after 15
minutes
Power turns off
automatically
Blue screen
Standby mode