Sharp 32US60 32US60 Operation Manual - Page 29

Set Up (Continued) • Saving broadcast TV channels into memory 1 Press MENU to access the MAIN MENU screen, then press CH a/s to move the "E" mark to "SET UP". 2 Press VOL k/l to access the SET UP screen, then press CH a/s to move the "E" mark to "CH SETTING". 3 Press VOL k/l to access the CH SETTING screen. → → CH SETT I NG EZ SETUP A IR/ CABLE CH SEARCH CH MEMORY (CH SETTING screen) 4 Press CH a/s to move the "E" mark to "CH SEARCH", then press VOL k/l to access → the CH SEARCH screen. CH SEARCH AIR 10 To start: Press VOL k. The tuner will search through all available channels in your area and add them into the TV memory. (START) To stop: Press VOL l. CH SEARCH will stop at the current channel and will not add any higher channels. 5 Press MENU to exit. (STOP) Note: • If you press VOL k again while in the CH SEARCH screen, autoprogram will start again, and the previously memorized channels will be lost. S TOP START (CH SEARCH screen) • Adding weak or additional channels or erasing unwanted channels from TV memory 1 Press MENU to access the MAIN MENU screen, then press CH a/s to move the "E" → mark to "SET UP". 2 Press VOL k/l to access the SET UP screen, then press CH a/s to move the "E" → mark to "CH SETTING". CH SETT I NG EZ SETUP A IR/ CABLE CH SEARCH CH MEMORY 3 Press VOL k/l to access the CH SETTING screen, then press CH a/s to move the "E" (CH SETTING screen) mark to "CH MEMORY". → 4 Press VOL k/l to access CH MEMORY. 5 Use CH a/s or REMOTE KEYPAD to select each desired channel to add or erase. 123 456 or 7 8 9 ENTER 0 100 29