Sharp 8M-B70AU Operation Manual 8M-B70AU - Page 108
Settings to use AQUOS LINK functions, You can set the remote control of the Monitor to use AQUOS
View all Sharp 8M-B70AU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Contents 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 7 languages. English >> Deutsch >> Français >> Italiano >> Español Polski >> Ver. 1.01 > AQUOS LINK and Other Devices < Using the AQUOS LINK Settings to use AQUOS LINK functions You can set the remote control of the Monitor to use AQUOS LINK functions such as selecting channels in AQUOS recorder. This setting should be made for each input terminal respectively. 1. Press OPTION, followed by / to select "Control menu", and then press ENTER 2. Select "AQUOS LINK Setup", and press ENTER 3. Select "Selecting channel key", and press ENTER 4. Select the input to which the device to be operated with the remote control is connected, and press ENTER 5. Select "On", and press ENTER For "Auto", a device operates in the same manner as it does when this is set to "Off". However, only when there is a request from a connected device, it will operate in the same manner as it does when this is set to "On". 5-13