Sharp AF-06ERL AF-06ERL Operation Manual - Page 15
OFF TIMER OPERATION, Touch the TIMER ON/OFF pad to set the, delayed stop time.
View all Sharp AF-06ERL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
HOW TO OPERATE OFF TIMER OPERATION • This unit has a built-in timer that can be programmed to shut the unit off up to 12 hours in advance. You can set the timer to stop in increments of 30 minutes (0.5 hours) up to 9.5 hours in advance of the stop time, or in 1 hour increments from 10 to 12 hours in advance of the stop time. • The unit will stop automatically according to your setting. F hr POWER ON/OFF SLEEP COOL TEMP SELECTOR TIMER ON/OFF ENERGY SAVER When the unit is operating 1 Touch the TIMER ON/OFF pad to set the delayed stop time. • The time setting will change as you touch the pad. The display will change as follows; Preset(0.5h) Previous setting 0.5h 1.0h 1.5h 10h CL(cancel) 12h 11h TIMER ON/OFF pad TIMER indicator (If you wish to stop the operation 10 hours later, set the delay time as shown above.) • The timer will be set, 5 seconds after the TIMER ON/OFF pad is touched for the last time. • TIMER indicator will light. • The time display will count down the remaining time. • The unit will stop when the set time expires. All indicators and displays will go out. TO CANCEL THE TIMER SETTING Touch the TIMER ON/OFF pad again after the timer is set or, press the TIMER ON/OFF pad until CL(cancel) appears on the display. NOTES FOR ON/OFF TIMER SETTING AND OPERATION: • After setting the TIMER, change the temperature and fan speed settings as shown on pages 11 and 12. When the temperature is set in the timer mode, the temperature will show in the display for 5 seconds and then return to the time display. • The last setting used will be memorized and will appear on the display the next time you operate the unit with the TIMER function. • If a power failure occurs while the ON or OFF TIMER is set, the TIMER memory will be cancelled and will not resume even after power is reinstated. The unit will not automatically start. • OFF TIMER OPERATION can also be set with the REMOTE CONTROL. 15