Sharp AF-08CRL Service Manual - Page 17

Unscrew the 1 screw holding the orifice.

Get Sharp AF-08CRL PDF manuals and user guides View all Sharp AF-08CRL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

AF-08CRL 9. Unfasten the one nut at the top of the compressor holding the terminal cover. Then remove the wiring connector of the compressor cord. 13. Unscrew the 7 screws. 4 screws are holding the evaporator on each side. 3 screws are holding the bulkhead to the base pan on each side and back side. 10. Unscrew the 4 screws holding the condenser. 1 screw is on right side. 1 screw is on left side. 2 screws are on back side. And remove the condenser from the unit. 14. Lift up and take out the bulkhead. 15. Unscrew the 1 screw holding the orifice. 11. Unfasten the nut holding the propeller fan by rotating it counter-clockwise. And remove the propeller fan. 16. Unscrew the 1 screw holding the top duct ass'y. 12. Unscrew the 2 screws holding the condenser shround. And remove the condenser shround. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
17
AF-08CRL
9.
Unfasten the one nut at the top of the compressor
holding the terminal cover.
Then remove the wiring connector of the compressor
cord.
13. Unscrew the 7 screws.
4 screws are holding the evaporator on each side.
3 screws are holding the bulkhead to the base pan on
each side and back side.
10. Unscrew the 4 screws holding the condenser.
1 screw is on right side.
1 screw is on left side.
2 screws are on back side.
And remove the condenser from the unit.
14. Lift up and take out the bulkhead.
15. Unscrew the 1 screw holding the orifice.
16. Unscrew the 1 screw holding the top duct ass'y.
11. Unfasten the nut holding the propeller fan by rotating it
counter-clockwise. And remove the propeller fan.
12. Unscrew the 2 screws holding the condenser shround.
And remove the condenser shround.