Sharp AF-Q100RX AF-Q100RX AF-Q120RX Operation Manual - Page 8

E Slide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case. Do not pull or lift on the styrofoam discharge area. INSTALL THE ATTACH THE TOP MOUNTING SIDE ACCORDION PANELS RAIL SEAL STRIP A Slide the left and right accordion panels Remove the backing from the top mounting into the top and bottom mounting rails. rail seal strip and attach the seal strip to the bottom of the top mounting rail, along the front edge. Allow the seal strip to B Attach the accordion panels to the case using 3 Type A screws on each side. overlap 3/8″ on each end. Top mounting rail 3/8″ FRONT VIEW Remove backing from seal strip 3/8″ Top mounting rail PREPARE THE WINDOW • Cut the window sash seal to the window width and stick the adhesive side to the bottom of the sash. 3/8″ overlap Seal strip 3/8″ overlap INSTALL THE TOP MOUNTING RAIL ONTO THE CASE Attach the top mounting rail onto the top of the case with 3 Type B screws. Window sash seal INSIDE