Sharp AF-Q120PX AF-Q100PX AF-Q120PX Operation Manual - Page 9

9 SECURE THE CASE IN WINDOW AND B Replace the 2 ground screws removed INSTALL FOAM TOP WINDOW GASKET earlier, one on each side of the case. IMPORTANT: The ground screws must A CAUTION: be reinstalled to ensure a proper ground. To prevent broken glass Vinyl or damage to windows, on vinyl or other similarly constructed windows, attach the support bracket to the window side jam. Attach the window locking brackets (one on each side) with Type C screws. Wood C Install control panel back to the front panel. B Cut the foam top window gasket to the window width. C Stuff the foam between the glass and the window to prevent air and insects from getting into the room. NOTE: If the gasket supplied does not fit your window, obtain appropriate material locally to provide a proper installation seal. 10 INSTALL THE AIR CONDITIONER IN THE CASE A Slide the air conditioner into the case by the base pan. Do not push on the controls, styrofoam air discharge housing or the finned coils. Make sure the air conditioner is firmly seated. D Attach the front grille to the case by inserting the tabs on the grille into the slots on the front top of the case. Push the grille in. E Secure the front grille to the case by replacing the 2 screws removed earlier. Press on the top of the grille to help with side screw installation. F Connect power. 9