Sharp AF-R140DX AF-R100DX , AF-R120DX , AF-R140DX Operation Manual - Page 7

INSTALLATION INSTRUCTIONS 6 Insert the closure assemblies on both sides into the rails of the jamb. Closure assembly (Left) Jamb (Left) Indoor side 1/2 inch (13mm) Sill Stool 7 (1) Secure the cabinet to the window stool with 3 screws (L=1", 25.4 mm), working from the inside of the cabinet. (2) Secure the top angle and the closure assemblies to the window sash with 3 screws (L=1", 25.4 mm). (3) Secure the closure assemblies to the sill with 2 screws (L=1", 25.4 mm). Closure assembly (Left) Top angle 8 (1) Slide the chassis back into the cabinet. (2) Replace the 4 screws removed in step 3 to the top and side of the cabinet . 9 (1) Replace the front panel. Slip the exhaust lever through the opening between the horizontal louver and the front panel then, hook the cabinet top. CAUTION: Take care not to damage the exhaust lever with the front panel. (2) Screw the front cabinet on at the bottom corners with 2 screws removed in step 2. 10 Cut the window sash foam seal to the proper length and seal the opening between the top of the inside window sash and the outside window sash. Horizontal Louver Front Panel Exhaust Lever Window sash foam seal 7