Sharp AJ-5030 AJ-Printer Operation Manual for Mac® - Page 12

"Paper" Menu Settings (part 2) Printer Properties Paper Selection Select "Tray" or "Bypass" for your print job. Tray Paper is fed to the printer from the paper tray. If the "Tray" is selected from this menu and paper is placed in the bypass tray, the paper in the bypass tray will be fed first, and then paper will be fed from the paper tray. Bypass Paper will be fed to the printer from the bypass tray. Only one sheet can be loaded into the bypass tray. To load paper into the bypass, place the paper into the tray against the guide and press the paper button. When printing one page: Load paper into the bypass then start printing from your computer. If paper is not loaded before printing is started, the paper lamp on the printer will blink and the message "Out of paper on bypass" will appear on the screen of the computer. When printing more than one page: Repeat as above for each page. Make sure to insert "Banner Letter" and "Banner A4" through the bypass tray. Max. 5 sheets of banner paper can be set to the bypass tray. Make sure that your application supports Banners when you intend to print onto Banners. Media Type Select the type of paper to be used. Select from "Plain", "Coated", "Photo", "Transparency", "T-shirt transfer", and "Card Stock". Insert the paper that was selected into the tray. For more information on various paper types, refer to the following table. Media Type Plain Coated Photo Transparency T-shirt transfer Card Stock Description Normal office paper (copier paper and high quality paper) The print side of coated paper is whiter. The print side of photo paper is glossy. Overhead presentation on clear film. The print side of transparency film is rougher. This media is to be transferred to cloth materials by an iron. Thick plain paper Media Usage Corporate documents Graphics, Images Photographs Overhead presentations T-shirt, Place mat Card printing ! Be sure to use only Sharp recommended OHP films when you select "Transparency". ! If you select "T-shirt transfer", the original image will be reversed on the printed media to make a proper image on the T-shirt. ! When "Card Stock" is selected, be sure to turn the paper knob to ( ) direction to feed the thicker card stock. How to Use the Online Manual Printer Properties Print Maintenance 10 Troubleshooting