Sharp AL 1641CS AL-1631 AL-1641CS Operation Manual - Page 20
Set the paper guides to the paper width. Insert the paper print - driver
UPC - 074000074668
View all Sharp AL 1641CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2 Set the paper guides to the paper width. Insert the paper (print face down) all the way into the multi-bypass tray. Print face • Paper must be fed narrow side into the feed slot. • Special papers such as transparency film, labels, and envelopes must be fed one sheet at a time through the multi-bypass tray. • When copying onto transparency film, remove each copy promptly. Do not let copies stack up. 3 Press the tray select ( ) key to select the multi-bypass tray. Note for loading envelopes • Envelopes must be fed narrow side into the feed slot at a time. • Do not use non-standard envelopes, and envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-adhesive, patches or synthetic materials. Do not use envelopes that are filled with air or envelopes that have labels or stamps attached. • Envelopes of which the surface is not flat because of embossing may cause the copies/prints to become smudged. • Under high humidity and temperature conditions the glue flaps on some envelopes may become sticky and be sealed closed when copied/printed. • Use only envelopes which are flat and crisply folded. Curled or poorly formed envelopes may be poorly printed or may cause misfeeds. • Be sure to select either Com10, DL, C5 or Monarch on the paper size setting of the printer driver. (For detailed information on printer driver, refer to the online manual.) • It is recommended that you perform a test print before performing the actual copied/ printed job. 18