Sharp AL-840 AL-840 Printer Operation Manual - Page 35
Copier Trouble?
UPC - 074000072954
View all Sharp AL-840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
6 COPIER TROUBLE? This chapter describes misfeed removal and troubleshooting. MISFEED REMOVAL When the misfeed ( ) indicator blinks or blinks in the display, the copier will stop because of a misfeed. First check the misfeed location. Remove the misfed paper following the instructions for each location shown in the illustration below. If blinks in the display, proceed to "A. Misfeed in the paper tray". (p. 34) If the paper is misfed here, proceed to "A. Misfeed in the paper tray". (p. 34) 6 Copier trouble? If the misfed paper is seen from this side, proceed to "C. Misfeed in the exit area". (p. 36) If paper is misfed here, proceed to "B. Misfeed in the copier". (p. 35) A. Misfeed in the paper tray 1 Pull the paper release lever at the right of the paper tray toward you. Paper release lever 2 Remove all the paper, including the jammed paper, from the paper tray. If the misfed paper will not come out easily, do not pull it hard, as you may tear it or damage the printing mechanism. In such cases, proceed to "B. Misfeed in the copier" on page 35. 34