Sharp AR 168D AR-168S AR-168D Operation Manual - Page 48
Windows 95/98/Me/NT 4.0/2000 Parallel - driver windows 8
![]() |
View all Sharp AR 168D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
SET UP THE SOFTWARE 10 Follow the instructions in the plug and play window to install the MFP driver Follow the on-screen instructions. If you are running Windows 2000 and a warning message appears Caution regarding the Windows logo test or digital signature, be sure to click "Yes". Note A "USB 2.0 Composite Device" installation window may appear prior to this procedure. In this case, follow the instructions in the window to install the USB 2.0 Composite Device. This completes the installation of the MFP driver. • If you installed Button Manager, set up Button Manager as explained in "SETTING UP BUTTON MANAGER" (p.51). Windows 95/98/Me/NT 4.0/2000 (Parallel) 1 The parallel cable must not be connected to the machine. Make sure that the cable is not connected before proceeding. If the cable is connected, a Plug and Play window will appear. If this happens, click the "Cancel" button to close the window and disconnect the cable. Note The cable will be connected in step 10. 2 Perform steps 2 through 7 in "CUSTOM INSTALLATION" (p.40 - p.41). 3 Click the "MFP Driver" button. To view detailed information on the software, click the "Display Readme" button. Note In Windows 95/NT4.0, the "Utility Software" button does not appear and only the printer driver can be installed. 4 The "Welcome" window will appear. Click the "Next" button. 46
![](/manual_guide/products/sharp-ar-168s-ar168s-ar168d-operation-manual-7ccbe79/48.png)