Sharp AR-275 AR-235 AR-275 Operation Manual - Page 68
Status Messages - toner
View all Sharp AR-275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
STATUS MESSAGES If any of the following messages appears in the display, carry out the prescribed remedy. Message (Maintenance icon) Maintenance required soon. Maintenance required. Call for service. Call for service. (Toner cartridge replacement required icon) Remedy Service by an authorized SHARP service technician will be required soon. Contact your service center as soon as possible.(This message will be displayed if the information key is pressed when the information ( ) icon is displayed.) Normal maintenance service by an authorized SHARP service technician is needed. Contact your service center. A malfunction has occurred which cannot be corrected by the key operator. Contact your authorized SHARP service center for service. Replacement of the toner cartridge will be needed soon. (This message will be displayed if the information key is pressed when the information ( ) icon is displayed.) See page 82. Toner is low. Check the toner cartridge. Check to see if the toner cartridge has been installed properly. Can not continue. Remove paper from the center tray. The number of copies on the center tray has reached the limit. Remove the copies from the center tray. Please check paper in paper Check to see if copy paper has been loaded properly. tray. Load paper into The paper size specified for the tray is different from the actual tray . Or cancel job and size. See page 78. change the paper size setting. Selected paper tray is out of Contact your authorized SHARP service center for service. service. Check stapler or staple jam. Staples become jammed or the staple box is not installed properly (when an optional finisher is installed). Check the staple box. See page 110 for staple jam removal. If the trouble cannot be easily remedied, use key operator program "DISABLE STAPLER" to prevent the use of the stapler until it can be repaired. Contact your authorized SHARP service center for service. # KEY OPERATOR See page 19 of the KEY OPERATOR'S GUIDE for enabling/disabling stapler. Please remove paper from the stapler compiler. Paper is left in the stapler compiler. Remove it. See page 112. : paper tray number : paper size to be set COPIER TROUBLE? 66