Sharp AR-M317 AR-M257 AR-317 Operation Manual Suite - Page 300
If a Notice is printed, When the Staple function is not selected:, When the Staple function is
View all Sharp AR-M317 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
3 TROUBLESHOOTING If a Notice Page is printed If you find that a notice page has been printed at the end of a print job, the print data received from the computer has not been printed as specified. Fix the problem as explained below and then try printing again. If a Notice Page is printed If the following Notice Page is printed, check your settings for the Staple function. ☞Stapling printed pages (when a finisher is installed) When the Staple function is not selected: Notice Page Disable the ROPM function by removing the checkmark from "ROPM" in the "Configuration" tab of the printer driver setup The IMC memory full error had occurred, a normal output was not able to be executed. screen. (See "CONFIGURING THE PRINTER DRIVER" in the software setup guide.) If you wish to use the ROPM function, set the print quality to "Draft" or increase memory. Please refer to the operation manual for the solution method. When the Staple function is selected: Select "Draft" for the "Print quality" setting, or increase the value set for "MEMORY FOR PRINTER" in the key operator programs. If this does not solve the problem, add more IMC memory. The IMC memory is used to store print data when the ROPM function is used. This memory is also used to store original image data Note in the copy mode. The percentage of IMC memory allocated to the printer function can be adjusted using a key operator program. See "MEMORY FOR PRINTER" in the key operator's guide. The memory can be extended by adding commercially available memory modules. For details, contact your SHARP dealer. Disabling notice page printing Notice page printing can be disabled using a key operator program (see "PROHIBIT NOTICE PAGE PRINTING" in the key operator's guide). CONTENTS 33