Sharp AR-M450 AR-M280 AR-M350 AR-M450 Operation Manual (for network scanni - Page 17
Selecting The Exposure
View all Sharp AR-M450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
SCANNING SETTINGS (ORIGINAL SIZE, RESOLUTION, AND EXPOSURE) SELECTING THE EXPOSURE After loading the original, you can adjust the contrast as needed for the darkness and type of the original. After loading the original in scanner mode, adjust the settings as explained below. The initial exposure setting is AUTO. I Change the exposure. 1 Touch the EXPOSURE key. AUTO EXPOSURE STANDARD RESOLUTION AUTO 81/2X11 ORIGINAL If the Fax Expansion Kit (AR-FX5) has been installed, the SPECIAL MODES key will appear in place of the EXPOSURE key. In this case, press the SPECIAL MODES key and then press the EXPOSURE key. 2 Touch the desired exposure key. The selected key is highlighted. I Exposure settings Dark Original Auto Light Original Select this setting if your original consists mostly of dark characters. This setting automatically adjusts the exposure for light and dark parts of the original. Select this setting if your original consists mostly of faint characters. DARK ORIGINAL AUTO LIGHT ORIGINAL 3 Touch the OK key. OK You will return to the initial screen. LIGHT NOTE When using the document glass to scan pages an original, the exposure setting can be changed each time you change pages. When using the automatic document feeder, the exposure setting cannot be changed once scanning has begun. 15