Sharp AR-M455N Copier - Page 65
Misfeed in the finisher
View all Sharp AR-M455N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
FINISHER Misfeed in the finisher When a misfeed occurs in the finisher, remove the misfed paper following the procedure below. 1 Remove the misfed paper from the output area. Be careful not to tear the misfed paper during removal. 5 Raise the paper guide and remove the misfed paper. Be careful not to tear the misfed paper during removal. Paper guide 2 Open the finisher top cover. Top cover Move the tab in the direction of the arrow as shown in the illustration to open the top cover. 6 Close the finisher compiler. 3 Remove the misfed paper. Be careful not to tear the misfed paper during removal. After removing the paper, press down on the top cover to close it. 4 Open the finisher compiler. Release the latch to open the finisher compiler. 3-12