Sharp AS194MI-BK User Manual - AS173M-BK-AS194Mi-BK - Page 26
To activate the [OSD LOCK OUT] function, open the [OSD TOOL] sub-menu, select [OSD LOCK OUT]
View all Sharp AS194MI-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
TOOL Selecting [TOOL] opens the [TOOL] sub-menu. RESPONSE IMPROVE*1 Turns the [RESPONSE IMPROVE] function [ON] or [OFF]. This function may reduce blurring that occurs in some moving images. DDC/CI This function turns the [DDC/CI] function [ON] or [OFF]. CARBON SAVINGS Displays the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving calculation is based on the OECD data (2008 Edition). The carbon saving information can be reset by pressing the INPUT/RESET button. CARBON USAGE Displays the estimated carbon usages information in kg. This is an arithmetic estimation, not actual measurement value. The carbon footprint factor in the carbon usage calculation is based on the OECD data (2008 Edition). The carbon usage information can be reset by pressing the INPUT/RESET button. MONITOR INFO. Indicates the model and serial numbers of your monitor. SOUND INPUT (HDMI, DisplayPort inputs only) Selects the sound input source. OSD TOOL Selecting [OSD TOOL] opens the [OSD TOOL] sub-menu. LANGUAGE Selects the language used by the OSD. OSD TURN OFF The OSD menu will stay open as long as it is in use. You can select how long the monitor waits after the last button press to close the OSD menu. The preset choices are 10-120 seconds by five-second increments. OSD LOCK OUT This control completely locks out access to all of the OSD control functions except for [VOLUME], [BRIGHTNESS], and [CONTRAST]. To activate the [OSD LOCK OUT] function, open the [OSD TOOL] sub-menu, select [OSD LOCK OUT], press and hold the INPUT/RESET and + buttons simultaneously until "OSD LOCKED OUT" indicator appears. To deactivate, press the SELECT button, then repeat the same steps until the OSD main menu opens on screen. SIGNAL INFORMATION If you select [ON], the monitor displays "VIDEO INPUT" after changing the input. NOTE: • The compliance marks that are shown when powering on the monitor the first time are not shown when switching inputs. The compliance marks are not shown again unless the AC power cord has been disconnected and reconnected. If you select [OFF], the monitor does not display "VIDEO INPUT" after changing the input. • Setting [OFF] also prevents the compliance marks from being shown when powering on the monitor. FACTORY PRESET Selecting [FACTORY PRESET] allows you to reset all OSD control settings back to the factory settings except [MUTE], [CARBON SAVINGS], [CARBON USAGE], and [SIGNAL INFORMATION]. Individual settings can be reset by highlighting the control to be reset and pressing the INPUT/RESET button. EXIT Selecting [EXIT] close OSD sub-menu/menu. *1: For AS194Mi only. English−24