Sharp CD-BA1600 CD-BA1600 Operation Manual
Sharp CD-BA1600 Manual
 |
View all Sharp CD-BA1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp CD-BA1600 manual content summary:
- Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 1
manual carefully. It will guide you in operating your SHARP product. CD-BA1600 Mini Component System consisting of CD-BA1600 (main unit) and CP-BA1600 and maintenance (servicing) instructions in the literature limits are designed to provide reasonable protection against harmful interference in a - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 2
the operating instructions or as marked on the appliance. 9 Power-Cord Protection - Power-supply grounding of the mast and supporting structure, grounding of the Damage Requiring Service - The appliance should be serviced by qualified service personnel when: operation manual other than those in - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 3
may result in electric shock. Refer internal service to your local SHARP service facility. q Use the unit on a guidelines below for maximum enjoyment from your CD collection and player. q Do not write on either taking place. Removing the tab will protect the corresponding side from being erased. - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 4
are placed near the AC power cord, interference may result. q Do not connect the attached FM antenna to an outdoor FM antenna. Otherwise, trouble may occur. Right speaker Red Black 1 2 3 Left speaker Red Black s Speaker connection Connect each speaker wire to the SPEAKER terminals as shown - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 5
(Continued) Left speaker Right speaker s Placing the speaker system The left and right speakers have individual shapes. For best performance, place the speakers according to the diagram to the left. To AC INPUT (Main unit operation) (Main unit operation) To an AC outlet AC 120 V, 60 Hz s - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 6
(Continued) q 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar) q Batteries are not included. 8" - 20' (0.2 m - 6 m) 15 15 s Remote control ë q When inserting or removing the batteries, push them toward the battery terminals. q Installing the batteries incorrectly may cause the unit to mal- - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 7
SETTING THE CLOCK (Main unit operation) POWER ON/ STAND-BY MEMORY/SET CLOCK TUNING/ TIME ( ) 2 3 4 AM 12:00 AM 0:00 0:00 5 6 7 8 9 In this example, the clock is set for the 12-hour (AM 12:00) system. 1 Press the ON/STAND-BY button to enter the stand-by mode. 2 Press the CLOCK button. 3 - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 8
SOUND CONTROL (Main unit) (Remote control) s Volume Press the VOLUME button to increase the volume and the VOLUME button to decrease the volume. 0 1 2 ..... 29 30 MAXIMUM (Main unit) (Remote control) X-BASS indicator s Extra bass (X-BASS) When the power is first turned on, the unit will - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 9
be placed on any open position on the disc tray. q Be sure to place 3" (8 cm) CD(s) in the middle of the disc trays. Caution: Do not stack CDs in the tray. This can damage the player and the CDs. 5 When loading a third disc, press the DISC SKIP button to turn the disc tray, then - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 10
resume when the 3 or 2 button is released. Notes: q When the end of the disc is reached while cueing, "END" will appear in the display and CD operation will be paused. (Even though the next disc has been loaded, the disc will not be switched.) Press the 3 button for fast reverse or - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 11
cancels the programmed sequence. q Even if you press the ON/STAND-BY button to enter the stand-by mode or the function is changed from CD to some other function, the programmed selections will not be cleared. q During APMS operation, random play is not possible. s Repeat play All tracks on up - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 12
) button to select the desired fre- quency band. (FM ST, FM or AM) 4 X W Press the TUNING/TIME ( or ) button to tune into the desired station. X W Manual tuning: Press the TUNING/TIME ( or ) button as many times as required to adjust the frequency shown on the display to the frequency of the - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 13
. When the PRESET button is pressed for more than 0.5 seconds, the unit will enter the preset memory scan mode. Backup function: The backup function protects all station presets for a few hours should there be a power failure or the AC power cord is removed from the AC outlet. CASSETTE OPERATION - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 14
q Metal and CrO2 tapes should not be used for recording or dubbing. s Recording from the built-in CD player (CD Synchronized Recording System) 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button and load the desired disc. q Use the APMS function to store the tracks you want to - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 15
timer, make sure that the clock setting is correct. (Page 6) (Main unit operation) POWER TIMER/ ON/ STAND-BY SLEEP Timer set indicator TUNER (BAND) CD TAPE (1 2) VIDEO/ AUX TUNING/ TIME ( ) MEMORY/ SET 3 4 5 s Timer playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 16
right channel, white → left channel) q When using video equipment (Laser Disc player or VCR), be sure to connect the audio output to this unit and the video all of the stored memory contents (clock and timer settings, and tuner and CD presets). q If the display is not correct. q If the operation is - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 17
30 hours of playing/recording time by using a commercial tape head demagnetizer. Read the demagnetizer's instructions carefully before use. q In order to ensure proper operation of the CD player, preventative maintenance (cleaning of the Laser Pick-up lens) should be performed periodically in order - Sharp CD-BA1600 | CD-BA1600 Operation Manual - Page 18
to Obtain Service: CD-BA1600 Mini Component System (Be sure to have this information available when you need service for your Product.) One (1) year parts and labor from the date of purchase. Non-functional accessories, supplies, and consumable items. At a Sharp Authorized Servicer located in the
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
OPERATION MANUAL
FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss
or theft, please record below the model number and serial
number which are located on the rear of the unit.
Please retain this information.
Model number
______________________________
Serial number
______________________________
Date of purchase____________________________
Place of purchase
___________________________
MODEL
CD-BA1600
MINI COMPONENT SYSTEM
Thank you for purchasing this SHARP product.
To obtain the best performance from this product,
please read this manual carefully.
It will guide you in operating your SHARP product.
CD-BA1600 Mini Component System consisting of
CD-BA1600 (main unit) and CP-BA1600 (speaker sys-
tem).
Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harm-
ful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
WARNING
FCC Regulations state that any unauthorized changes or modifications
to this equipment not expressly approved by the manufacturer could void
the user’s authority to operate this equipment.
CAUTION
RISK OF ELECTRIC SHOCK
DO
NOT OPEN
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
CAUTION:
TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE
COVER (OR
BACK).
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSON-
NEL.
The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servic-
ing) instructions in the literature ac-
companying the appliance.
Caution - use of controls or adjustments or per-
formance of procedures other than those specified
herein may result in hazardous radiation exposure.
WARNING: TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT EX-
POSE THIS APPLIANCE TO RAIN OR
MOISTURE.
Note:
●
It is the intent of Sharp that this product be used in
full compliance with the copyright laws of the United
States and that prior permission be obtained from co-
pyright owners whenever necessary.