Sharp CD-G20000 CD-G20000 Operation Manual - Page 14

CD-G20000 System connections (continued) CP-G20000S Make sure to unplug the AC power cord of the main unit before making any connections. Connecting the subwoofer Use the subwoofer cable to connect the SUBWOOFER PRE-OUT jack on the main unit and the SUBWOOFER IN jack on the active subwoofer. Main unit AC power connection After checking all the connections have been made correctly, plug the AC power cord of this unit into the AC outlet. If you plug in the unit first, the unit will enter the demonstration mode. ANTENNA FM GND AM 75 OHMS VIDEO OUT ANTENNA FM GND AM 75 OHMS VIDEO OUT REAR SPEAKERS RIGHT LEFT RATED SPEAKER IMPEDANCE : 16 OHMS MIN. To subwoofer output jack Subwoofer cable REAR SPEAKERS RIGHT LEFT RATED SPEAKER IMPEDANCE : 16 OHMS MIN. Active subwoofer AC outlet (AC 120 V, 60 Hz) Active subwoofer To subwoofer input jack Preparation for Use AC outlet (AC 120 V, 60 Hz) Notes: The unit will start the tape initialization when plugged in to the AC outlet. During this process, an initializing sound will be heard and the unit cannot be turned on. Wait until the process is finished. Unplug the AC power cord from the AC outlet if the unit will not be 14 in use for a prolonged period of time.