Sharp CD-MPS600 CD-MPS66 CD-MPS600 Operation Manual - Page 26

CD-MPS66 CD-MPS600 Listening to the radio ! Tuning 1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). 3 Press the TUNING ( or ) button to tune in to the desired station. Radio Auto power on function: When you press any of the following buttons, the unit turns on. " TUNER (BAND) button (main unit and remote control): The unit turns on and the "TUNER" function is activated. " / button (main unit and remote control): The unit turns on and playback of the last function starts (CD/TAPE/TUNER/ GAME). Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Notes: " When radio interference occurs, auto scan tuning may stop auto- matically at that point. " Auto scan tuning will skip weak signal stations. " To stop the auto tuning, press the TUNING button again. To receive an FM stereo transmission: Press the TUNER (BAND) button to display the "ST" indicator. " " " will appear when an FM broadcast is in stereo. " If the FM reception is weak, press the TUNER (BAND) button to extinguish the "ST" indicator. The reception changes to monaural, and the sound becomes clearer. FM stereo mode indicator FM stereo receiving indicator 26