Sharp CD-SW340 CD-SW340 Operation Manual - Page 38
Maintenance, Specifications - dimensions
View all Sharp CD-SW340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
CD-SW340 Maintenance Cleaning the tape-handling parts Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. When cleaning the heads, pinch rollers, etc., unplug the unit which contains high voltages. 5 4 3 2 1 TIMER 5 CD 4 3 2 1 TAPE 1 TAPE 2 AB C D EB C PLAYYBBAACCKK ((PPLLAAYY&&SSTTOOPP)) PHONES AUDIO IN RREECCOORRDD/P/PLALYAYBBACACKK References Playback head Capstans Pinch rollers Erase head Recording/Playback head After long use, the deck's heads and capstans may become magnetized, causing poor sound. Demagnetize these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetizer. Read the demagnetizer's instructions carefully before use. Cleaning the CD pickup lens In order to ensure proper operation of the CD player, preventative maintenance (cleaning of the laser pickup lens) should be performed periodically. Lens cleaners are commercially available. Contact your local CD software dealer for options. Cleaning the cabinet Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. Caution: Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet finish. Do not apply oil to the inside of the unit. It may cause 38 malfunctions. Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. General Power source AC 120 V ~ 60 Hz Power consumption 195 W Dimensions Width: 10-1/4" (260 mm) Height: 13" (332 mm) Depth: 12-7/8" (324 mm) Weight 21.6 lbs. (9.8 kg) Amplifier Output power Output terminals Input terminals Front Speakers RMS: Total 250 W (125 watts per channel into 6 ohms at 1 KHz, 10% Total harmonic distortion.) Front Speakers FTC: 100 watts minimum RMS per channel into 6 ohms from 100 Hz to 20 KHz, 10% Total harmonic distortion. Subwoofer RMS: 250 watts into 12 ohms at 100 Hz, 10% total harmonic distortion. Subwoofer FTC: 200 watts RMS into 12 ohms from 50 Hz to 120 Hz, 10% Total harmonic distortion. Front Speakers: 6 ohms Subwoofer: 12 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) AUDIO IN (audio signal): 500 mV/ 47 k ohms AUDIO IN: 1Vp-p