Sharp CNETsidekick3 Reference Guide - Page 26
Key Guard Mode - 3 codes
View all Sharp CNETsidekick3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Key Guard Mode You can effectively lock the controls by entering key guard mode. By default, your device is set to enter key guard mode after one minute of idle time. Enter Key Guard Mode 1 Press JUMP to go to the Jump screen. Press MENU to open the menu, scroll to highlight Key Guard, then press the trackball. You can also enter key guard mode quickly by pressing and holding DONE for two seconds. 2 Your device control buttons lock and the key guard screen appears. Tip To turn on the backlight while in key guard, press the right shoulder button. 3 To unlock and wake the device, press MENU + DONE . You can also wake the device by opening the screen. If you have set a privacy code (see next section), type it at the prompt. To prevent display damage, after your device has been in key guard mode for two hours, a screen saver will appear. To dismiss the screen saver, press any key or open the device. Note Change Default Key Guard Idle Time 1 Press JUMP to open the Jump screen. Press MENU then select Settings > Key Guard & Security. 2 In the Key Guard group box, scroll down to highlight the "Guard after" pop-up. Press the trackball to open the pop-up. Highlight an idle time, then press the trackball to select it. 3 Press DONE to save your settings and return to the Jump screen. Your device will still receive calls and messages while in key guard mode. 26 Setting Up Your Device