Sharp CV-P09FX CV-P09FX Operation Manual - Page 18
Installation And Removal Of Exhaust Hose
View all Sharp CV-P09FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
INSTALLATION AND REMOVAL OF EXHAUST HOSE The exhaust hose must be installed or removed in accordance with the usage mode. .0%& COOL, FAN, VENTILATION, DEHUMIDIFICATION with no container DEHUMIDIFICATION with container(minimum capacity 3 gallons) &9)"645)04& Install Remove Installation of the exhaust hose 1 Attach the window exhaust adapter to the exhaust hose. Extend one end of the exhaust hose and insert it into the window exhaust adapter, and turn it (approx. three times) until it stops. Make sure they are securely attached afterwards. 2 Attach the exhaust hose adapter to the unit. Insert the two projections on the exhaust hose adapter into the two holes on the unit, and firmly attach them to each other. 3 Slide and open the exhaust cover on the window panel, and attach the window exhaust adapter. Surface of window exhaust adapter marked "TOP" should be at the top when it is installed in a double-hung sash window. Surface of window exhaust adapter marked "TOP" should be on the window frame side when it is installed in a sliding sash window. Window exhaust adapter Extend Exhaust hose Projection Hole "TOP" The exhaust hose should be as short as possible for operational efficiency; however, it must not be twisted or bent. Unacceptable Acceptable Acceptable E-16