Home » Sharp Manuals » Boomboxes » Sharp DKA10 » Manual Viewer

Sharp DKA10 DK-A10 DK-A10BK Operation Manual - Page 26

Advanced Features

Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Advanced Features DK-A10 Alarm and sleep operation (continued) DK-A10BK Sleep operation The radio and iPod can be turned off automatically. 1 Play back the desired sound source. 2 Press the SLEEP button to select sleep time. 3 Press the MEMORY button. "SLEEP" will appear. 4 The unit will enter the power stand-by mode automatically after the preset time has elapsed. The volume will be turned down 1 minute before the sleep operation finishes. To confirm the remaining sleep time: 1 While "SLEEP" is indicated, press the SLEEP button once to select "SLEEP XXX". "XXX" is sleep remaining time. The remaining sleep time is displayed for about 10 seconds. You can change the remaining sleep time while it is displayed by pressing the SLEEP button (steps 2 - 3). To cancel the sleep operation: Press the ON/STAND-BY button while "SLEEP" is indicated. To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows. 1 While "SLEEP" is indicated, press the SLEEP button to select "SLEEP OFF", and press the MEMORY button. To use alarm and sleep operation together Sleep and alarm: For example, you can fall asleep listening to the radio and wake up to iPod in the next morning. 1 Set the sleep time (see left, steps 1 - 4). 2 While the sleep timer is set, set the alarm (steps 1 - 5, page 25). Sleep timer setting Alarm setting End time 10 minutes - 2 hours 30 minutes Sleep operation will automatically stop Alarm start time 26

Section	Page
DK-A10 EN 01-30.fm .pdf	2
Important Instruction	2
SPECIAL NOTES	2
<GRAPHIC>	2
<GRAPHIC>	2
<GRAPHIC>	2
<GRAPHIC>	2
<GRAPHIC>	2
<GRAPHIC>	3
IMPORTANT SAFETY INSTRUCTIONS	3
<GRAPHIC>	3
<GRAPHIC>	4
IMPORTANT SAFETY INSTRUCTIONS (continued)	4
IMPORTANT SAFETY INSTRUCTIONS (continued)	4
<GRAPHIC>	4
<GRAPHIC>	5
<GRAPHIC>	5
<GRAPHIC>	5
Supply of this product does not convey a license nor imply any right to distribute content create...	5
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.	5
Contents	5
Page	5
Page	5
Page	5
n General Information	5
Precautions 6	5
Precautions 6	5
Precautions 6	5
Controls and indicators 7 - 9	5
Controls and indicators 7 - 9	5
Controls and indicators 7 - 9	5
n Preparation for Use	5
System connections 10	5
System connections 10	5
System connections 10	5
Remote control 11	5
Remote control 11	5
Remote control 11	5
n Basic Operation	5
General control 12	5
General control 12	5
General control 12	5
Setting the clock 13	5
Setting the clock 13	5
Setting the clock 13	5
n iPod	5
Listening to the iPod 14 - 16	5
Listening to the iPod 14 - 16	5
Listening to the iPod 14 - 16	5
n CD or MP3/WMA disc Playback	5
Listening to a CD or MP3/WMA disc 17 - 18	5
Listening to a CD or MP3/WMA disc 17 - 18	5
Listening to a CD or MP3/WMA disc 17 - 18	5
Advanced CD or MP3/WMA disc playback 19 - 20	5
Advanced CD or MP3/WMA disc playback 19 - 20	5
Advanced CD or MP3/WMA disc playback 19 - 20	5
MP3/	5
MP3/	5
n Radio	5
Listening to the radio 23 - 24	5
Listening to the radio 23 - 24	5
Listening to the radio 23 - 24	5
n Advanced Features	5
Alarm and sleep operation 25 - 26	5
Alarm and sleep operation 25 - 26	5
Alarm and sleep operation 25 - 26	5
Enhancing your system 27	5
Enhancing your system 27	5
Enhancing your system 27	5
n References	5
Troubleshooting chart 28 - 29	5
Troubleshooting chart 28 - 29	5
Troubleshooting chart 28 - 29	5
Maintenance 29	5
Maintenance 29	5
Maintenance 29	5
Specifications 29	5
Specifications 29	5
Specifications 29	5
CONSUMER LIMITED WARRANTY Back cover	5
CONSUMER LIMITED WARRANTY Back cover	5
CONSUMER LIMITED WARRANTY Back cover	5
General Information	6
Precautions	6
n General	6
<TABLE>	6
<TABLE>	6
<TABLE BODY>	6
<TABLE ROW>	6
l Use the unit on a firm, level surface free from vibration.	6
l Use the unit on a firm, level surface free from vibration.	6
<GRAPHIC>	6
<TABLE>	6
<TABLE BODY>	6
<TABLE ROW>	6
l Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and e...	6
l Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and e...	6
<GRAPHIC>	6
l Do not place anything on top of the unit.	6
l Do not place anything on top of the unit.	6
l Do not place anything on top of the unit.	6
l Do not expose the unit to moisture, to temperatures higher than 140F (60C) or to extremely lo...	6
l Do not expose the unit to moisture, to temperatures higher than 140F (60C) or to extremely lo...	6
l Do not expose the unit to moisture, to temperatures higher than 140F (60C) or to extremely lo...	6
l Do not expose the unit to moisture, to temperatures higher than 140F (60C) or to extremely lo...	6
l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...	6
l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...	6
l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...	6
l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...	6
<TABLE>	6
<TABLE>	6
<TABLE BODY>	6
<TABLE ROW>	6
l In case of an electrical storm, unplug the unit for safety.	6
l In case of an electrical storm, unplug the unit for safety.	6
<GRAPHIC>	6
<TABLE>	6
<TABLE BODY>	6
<TABLE ROW>	6
l Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can...	6
l Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can...	6
l The AC power plug is used as disconnect device and shall always remain readily operable.	6
<GRAPHIC>	6
<TABLE>	6
<TABLE BODY>	6
<TABLE ROW>	6
l Do not remove the outer cover, as this may result in electric shock. Refer internal service to ...	6
l Do not remove the outer cover, as this may result in electric shock. Refer internal service to ...	6
l Do not remove the outer cover, as this may result in electric shock. Refer internal service to ...	6
<GRAPHIC>	6
l This unit should only be used within the range of 41F - 95F (5C - 35C).	6
l This unit should only be used within the range of 41F - 95F (5C - 35C).	6
l This unit should only be used within the range of 41F - 95F (5C - 35C).	6
The voltage used must be the same as that specified on this unit. Using this product with a highe...	6
n Volume control	6
The sound level at a given volume setting depends on speaker efficiency, location and various oth...	6
General Information	7
Controls and indicators	7
<GRAPHIC>	7
<GRAPHIC>	7
Reference page	7
Reference page	7
Reference page	7
1. iPod Terminal 15	7
1. iPod Terminal 15	7
1. iPod Terminal 15	7
2.	7
2.	7
2.	7
3. Clock Button 13	7
3. Clock Button 13	7
3. Clock Button 13	7
4. iPod Button 14	7
4. iPod Button 14	7
4. iPod Button 14	7
5. Remote Sensor 11	7
5. Remote Sensor 11	7
5. Remote Sensor 11	7
6. CD Button 17	7
6. CD Button 17	7
7. Auxiliary Button 27	7
7. Auxiliary Button 27	7
7. Auxiliary Button 27	7
8. Snooze/Dimmer Button 12, 25	7
8. Snooze/Dimmer Button 12, 25	7
8. Snooze/Dimmer Button 12, 25	7
9. Tuner Button 23	7
9. Tuner Button 23	7
9. Tuner Button 23	7
10. CD Eject Button 18	7
10. CD Eject Button 18	7
11. Alarm Indicator 25	7
11. Alarm Indicator 25	7
11. Alarm Indicator 25	7
12. Alarm Button 25	7
12. Alarm Button 25	7
12. Alarm Button 25	7
13. Alarm ON/OFF Button 25	7
13. Alarm ON/OFF Button 25	7
13. Alarm ON/OFF Button 25	7
14. E Sound Button 10, 12	7
14. E Sound Button 10, 12	7
14. E Sound Button 10, 12	7
15. Play/Pause Button 16, 18	7
15. Play/Pause Button 16, 18	7
15. Play/Pause Button 16, 18	7
16. Skip Down, Tuner Preset Down Button 13, 16, 18, 24	7
16. Skip Down, Tuner Preset Down Button 13, 16, 18, 24	7
16. Skip Down, Tuner Preset Down Button 13, 16, 18, 24	7
17. Skip Up, Tuner Preset Up Button 13, 16, 18, 24	7
17. Skip Up, Tuner Preset Up Button 13, 16, 18, 24	7
17. Skip Up, Tuner Preset Up Button 13, 16, 18, 24	7
18. Stop Button 12	7
18. Stop Button 12	7
18. Stop Button 12	7
19. Volume Down Button 12	7
19. Volume Down Button 12	7
19. Volume Down Button 12	7
20. Volume Up Button 12	7
20. Volume Up Button 12	7
General Information	8
Controls and indicators (continued)	8
<GRAPHIC>	8
n Display	8
Reference page	8
Reference page	8
Reference page	8
1. Alarm Indicator 25	8
1. Alarm Indicator 25	8
1. Alarm Indicator 25	8
2. Sleep Indicator 26	8
2. Sleep Indicator 26	8
2. Sleep Indicator 26	8
3. MP3 Indicator 18	8
3. MP3 Indicator 18	8
3. MP3 Indicator 18	8
4. WMA Indicator 18	8
4. WMA Indicator 18	8
4. WMA Indicator 18	8
5. FOLD Indicator 22	8
5. FOLD Indicator 22	8
5. FOLD Indicator 22	8
6. CD Indicator 18	8
6. CD Indicator 18	8
6. CD Indicator 18	8
7. iPod Indicator 14	8
7. iPod Indicator 14	8
7. iPod Indicator 14	8
8. Aux Indicator 27	8
8. Aux Indicator 27	8
8. Aux Indicator 27	8
9. FM Stereo Mode Indicator 23	8
9. FM Stereo Mode Indicator 23	8
9. FM Stereo Mode Indicator 23	8
10. FM Stereo Receiving Indicator 23	8
10. FM Stereo Receiving Indicator 23	8
10. FM Stereo Receiving Indicator 23	8
11. Total Indicator 18, 22	8
11. Total Indicator 18, 22	8
11. Total Indicator 18, 22	8
12. Random Indicator 19	8
12. Random Indicator 19	8
12. Random Indicator 19	8
13. Summer Indicator 13	8
13. Summer Indicator 13	8
13. Summer Indicator 13	8
14. Pause Indicator 16, 18	8
14. Pause Indicator 16, 18	8
14. Pause Indicator 16, 18	8
15. Memory Indicator 20	8
15. Memory Indicator 20	8
15. Memory Indicator 20	8
16. Repeat Play Indicator 19	8
16. Repeat Play Indicator 19	8
16. Repeat Play Indicator 19	8
17. Play Indicator 18	8
17. Play Indicator 18	8
17. Play Indicator 18	8
n Rear panel	8
Reference page	8
Reference page	8
Reference page	8
1. FM 75 Ohms Antenna Jack 10	8
1. FM 75 Ohms Antenna Jack 10	8
1. FM 75 Ohms Antenna Jack 10	8
2. AM Antenna Ground Terminal 10	8
2. AM Antenna Ground Terminal 10	8
3. Summer Time Switch 13	8
3. Summer Time Switch 13	8
4. AM Loop Antenna Terminal 10	8
4. AM Loop Antenna Terminal 10	8
5. Video Out Jack 27	8
5. Video Out Jack 27	8
6. Auxiliary Input Jacks 27	8
6. Auxiliary Input Jacks 27	8
7. Headphone Jack 27	8
7. Headphone Jack 27	8
8. AC Input Jack 10	8
8. AC Input Jack 10	8
General Information	9
<GRAPHIC>	9
<GRAPHIC>	9
Reference page	9
Reference page	9
Reference page	9
1. Remote Control Transmitter 11	9
1. Remote Control Transmitter 11	9
2. Function Button 16	9
2. Function Button 16	9
2. Function Button 16	9
3. On/Stand-by Button 11, 12, 23	9
3. On/Stand-by Button 11, 12, 23	9
4. Volume Up and Down Buttons 12	9
4. Volume Up and Down Buttons 12	9
5. Skip Down, Tuner Preset Down Button 13, 16, 18, 24	9
5. Skip Down, Tuner Preset Down Button 13, 16, 18, 24	9
5. Skip Down, Tuner Preset Down Button 13, 16, 18, 24	9
6. Folder Button 21	9
6. Folder Button 21	9
6. Folder Button 21	9
7. Stop Button 18	9
7. Stop Button 18	9
7. Stop Button 18	9
8. Play Mode Button 16, 19	9
8. Play Mode Button 16, 19	9
8. Play Mode Button 16, 19	9
9. Tuning Up and Down Buttons 23	9
9. Tuning Up and Down Buttons 23	9
10. Memory Button 20, 24	9
10. Memory Button 20, 24	9
11. Clock Button 13	9
11. Clock Button 13	9
12. Snooze/Dimmer Button 12, 25	9
12. Snooze/Dimmer Button 12, 25	9
13. Sleep Button 26	9
13. Sleep Button 26	9
14. Alarm Button 25	9
14. Alarm Button 25	9
15. Skip Up, Tuner Preset Up Button 13, 16, 18, 24	9
15. Skip Up, Tuner Preset Up Button 13, 16, 18, 24	9
16. Display Button 16	9
16. Display Button 16	9
17. Play/Pause Button 16, 18, 19	9
17. Play/Pause Button 16, 18, 19	9
18. E Sound/Demo Button 10, 12	9
18. E Sound/Demo Button 10, 12	9
19. Clear Button 20	9
19. Clear Button 20	9
20. EQ Button 12	9
20. EQ Button 12	9
Before using remote control, please remove plastic shield at battery holder.	9
<TABLE>	9
<TABLE BODY>	9
<TABLE ROW>	9
<GRAPHIC>	10
System connections	10
<TABLE>	10
<TABLE>	10
<TABLE>	10
<TABLE BODY>	10
<TABLE ROW>	10
Make sure to unplug the AC power cord before any connections.	10
<TABLE ROW>	10
<TABLE>	10
<TABLE>	10
<TABLE BODY>	10
<TABLE ROW>	10
Supplied FM antenna:	10
Supplied FM antenna:	10
Connect the FM antenna wire to the FM 75 OHMS jack and position the FM antenna wire in the direct...	10
<GRAPHIC>	10
<GRAPHIC>	10
<TABLE>	10
<TABLE>	10
<TABLE BODY>	10
<TABLE ROW>	10
< Assembling >	10
< Assembling >	10
< Attaching to the wall >	10
< Attaching to the wall >	10
<TABLE ROW>	10
<GRAPHIC>	10
Wall	10
Wall	10
Screws (not supplied)	10
Screws (not supplied)	10
n Outdoor FM antenna	10
Use an outdoor FM antenna if you require better reception. Consult your dealer.	10
<GRAPHIC>	10
<GRAPHIC>	10
n iPod connecting to TV	10
iPod photo and 5th Generation iPod with photo and video can be view by connecting to TV/monitor. ...	10
<GRAPHIC>	10
<GRAPHIC>	10
After checking all the connections have been made correctly, plug the AC power cord of this unit ...	10
<GRAPHIC>	10
<GRAPHIC>	10
l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...	10
l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...	10
l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...	10
<TABLE>	10
<TABLE BODY>	10
<TABLE ROW>	10
n Demonstration mode	10
The first time the unit is plugged in, the unit will enter the low power consumption mode.	10
To activate the demonstration mode:	10
To activate the demonstration mode:	10
When the unit is in the power stand-by mode (low power consumption mode), press the E SOUND/DEMO ...	10
<GRAPHIC>	10
<TABLE>	10
<TABLE BODY>	10
<TABLE ROW>	10
To return to the low power consumption mode:	10
To return to the low power consumption mode:	10
To return to the low power consumption mode:	10
When the unit is in the power stand-by mode, press the E SOUND/ DEMO button again. The iPod termi...	10
<TABLE ROW>	10
<TABLE ROW>	10
<TABLE ROW>	10
Note:	10
Note:	10
Note:	10
When the power is on, the E SOUND/DEMO button can be used to select the E SOUND mode.	10
<TABLE ROW>	11
Remote control	11
n Battery installation	11
<TABLE>	11
<TABLE>	11
<TABLE BODY>	11
<TABLE ROW>	11
1	11
1	11
1	11
While pushing the locking tab toward the center of the remote control, slide out the battery holder.	11
While pushing the locking tab toward the center of the remote control, slide out the battery holder.	11
While pushing the locking tab toward the center of the remote control, slide out the battery holder.	11
<GRAPHIC>	11
2	11
2	11
2	11
Remove the old battery from the battery holder, insert the new battery and then slide the battery...	11
Remove the old battery from the battery holder, insert the new battery and then slide the battery...	11
<TABLE ROW>	11
<GRAPHIC>	11
l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...	11
l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...	11
l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...	11
l Do not use rechargeable battery (nickel-cadmium battery, etc.).	11
l Do not use rechargeable battery (nickel-cadmium battery, etc.).	11
l Do not use rechargeable battery (nickel-cadmium battery, etc.).	11
l Do not use rechargeable battery (nickel-cadmium battery, etc.).	11
l Installing the battery incorrectly may cause the unit to malfunction.	11
l Installing the battery incorrectly may cause the unit to malfunction.	11
l Installing the battery incorrectly may cause the unit to malfunction.	11
l Installing the battery incorrectly may cause the unit to malfunction.	11
l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...	11
l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...	11
l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...	11
l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...	11
l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...	11
l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...	11
l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...	11
l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...	11
l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...	11
l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...	11
l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...	11
l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...	11
l Keep the remote control away from moisture, heat, shock, and vibrations.	11
l Keep the remote control away from moisture, heat, shock, and vibrations.	11
l Keep the remote control away from moisture, heat, shock, and vibrations.	11
l Keep the remote control away from moisture, heat, shock, and vibrations.	11
n Test of the remote control	11
Check the remote control after checking all the connections (see page 10).	11
Point the remote control directly at the remote sensor on the unit.	11
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy music.	11
<GRAPHIC>	11
<GRAPHIC>	12
General control	12
<GRAPHIC>	12
<GRAPHIC>	12
Press the ON/STAND-BY button to turn the power on.	12
<TABLE>	12
<TABLE>	12
<TABLE BODY>	12
<TABLE ROW>	12
After use:	12
After use:	12
After use:	12
<TABLE ROW>	12
Press the ON/STAND-BY button to enter the power stand-by mode.	12
Press the ON/STAND-BY button to enter the power stand-by mode.	12
n Illumination light control	12
Press the SNOOZE/DIMMER button to adjust the brightness of the display and LED.	12
n Volume auto fade-in	12
n Volume auto fade-in	12
If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16...	12
n Volume control	12
Main unit and remote control operation: Press the VOL (+ or –) button to increase or decrease the...	12
<GRAPHIC>	12
<GRAPHIC>	12
When the E SOUND/DEMO button is pressed, the unit will enter the E Sound mode and adjust low bass...	12
n Equalizer	12
When the EQ button is pressed, the current mode setting will be displayed. To change to a differe...	12
n Function	12
When the FUNCTION button on remote control is pressed, the current function will change to differ...	12
<GRAPHIC>	12
<GRAPHIC>	12
The backup function protect the memorized function mode for a few days should there be a power fa...	12
Basic Operation	13
Setting the clock	13
<GRAPHIC>	13
<GRAPHIC>	13
<TABLE>	13
<TABLE>	13
<TABLE BODY>	13
<TABLE ROW>	13
1 Press the CLOCK button for more than 2 seconds.	13
1 Press the CLOCK button for more than 2 seconds.	13
1 Press the CLOCK button for more than 2 seconds.	13
1 Press the CLOCK button for more than 2 seconds.	13