Sharp DV-S1U DV-S1U Operation Manual - Page 11
Connecting To An Amplifier Equipped With Digital, Input Jacks, Md Deck Or Dat Deck, Connecting To
![]() |
View all Sharp DV-S1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS, MD DECK OR DAT DECK Use audio coaxial digital cables (commercially available) for the audio connections. A/V-compatible or wide screen TV or To S-VIDEO INPUT jack To S-VIDEO OUT jack To VIDEO INPUT jack To VIDEO OUT jack AUDIO OUT VIDEO OUT Y PR Amplifier equipped with digital input jacks, MD deck, DAT deck, etc. DIGITAL R L VIDEO PB S-VIDEO To COAXIAL DIGITAL AUDIO OUT jack To COAXIAL DIGITAL AUDIO INPUT jack [Fig. 4] CONNECTING TO A TV OR A STEREO TV THAT HAS COMPONENT VIDEO IN JACKS Set Dolby Digital and DTS to OFF on the DVD Player. If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the speakers. A/V-compatible or wide screen TV To COMPONENT VIDEO INPUT jacks To COMPONENT VIDEO OUT jacks (Y / PB /PR) Stereo system AUDIO OUT VIDEO OUT Y PR DIGITAL R L VIDEO PB S-VIDEO To Right (red) and Left (white) AUDIO OUT jacks To ANALOG AUDIO INPUT jacks [Fig. 5] Notes ¡The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck. ¡Be sure to turn off the power to all components in the system before connecting another component. ¡Refer to the Operation Manuals for the components to be connected to the DVD player. ¡Set Dolby Digital and DTS to off for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV's 75-ohm coaxial antenna terminal using a Stereo Audio/Video RF Modulator (commercially available). Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked "TO TV") to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details. - 11 - EN 9F21
![](/manual_guide/products/sharp-dvs1u-dvs1u-operation-manual-a126e78/11.png)