Sharp DV-S1UC DV-S1U Operation Manual - Page 20
Settings
View all Sharp DV-S1UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
SETTINGS CHANGING THE AUDIO LANGUAGE OR SOUND MODE DVD CD The DVD player has a function which allows you to select the desired audio language and sound mode. For DVDs Press the AUDIO button during playback, and then press the AUDIO button to select the desired audio language. ¡The audio language can be changed if multiple languages are recorded on the DVD being played. 1.ENG D 5.1CH 48k/3 2.FRE D 5.1CH 48k/3 Notes ¡Pressing the Audio button may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). Operation varies between discs, so refer to the manual accompanying the disc. ¡Current audio language and sound mode will be displayed when you press the AUDIO button at first . ¡If a desired language is not shown after pressing the Audio button several times, the disc does not have an audio source in that language. ¡The audio language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected. ¡The screen display will disappear after about 5 seconds. ¡If you use DIGITAL AUDIO OUT jack, the sound mode of audio CDs can not be changed. 3.JPN D 5.1CH 48k/3 HELLO Bon jour For audio CDs Press the AUDIO button during playback. ¡Pressing the AUDIO button cycles the sound mode through STEREO, L-CH and R-CH. STEREO L-CH Both right and left channels are active (stereo). Only the left channel is active. R-CH Only the right channel is active. - 20 - EN 9F21