Sharp DV-SL20U DVSL20U Operation Manual - Page 12

PLAYING A DISC REPEAT TRACK Random Playback CD To activate the repeat function, press REPEAT during playback. • The repeat mode changes as described below every time you press the button. TRACK ALL (current track repeat) (entire disc repeat) OFF (repeat off) CD This shuffles the playing order of tracks instead of playback in the sequence. 1 In stop mode, press MODE twice. • RANDOM screen appears. 2 Press PLAY to start ran- dom playback. NOTES: • The REPEAT setting will be cleared when moving to other track. • Repeat playback does not function during A-B REPEAT play- back. A-B REPEAT NOTES: • If you like to repeat the cur- rent track in the random selection, press REPEAT repeatedly until TRACK appears during playback. If you like to repeat the entire random selection press REPEAT repeatedly until ALL appears during playback. DVD CD DVD-RW VR mode 1 Press A-B REPEAT at your chosen starting point. • A- appears briefly on the TV screen. 2 Press A-B REPEAT again at your chosen end point. • A-B appears briefly on the TV screen, and the repeat sequence begins. 3 To exit the sequence, press A-B REPEAT . MP3 Playback MP3 When a CD with MP3 files is inserted in the DVD player, the MP3 menu will appear on the TV screen, and number of tracks is displayed on the front panel. 1 In stop mode, press K or L to select the desired group or track. NOTES: • The A-B REPEAT section can only be set within the cur- rent title (for DVDs), or current track (for audio CDs). • A-B REPEAT is not available with some scenes in DVD. • To cancel the A point which was set, press CLEAR. • A-B REPEAT playback does not function during title, chap- ter, track or all repeat playback. Program CD You may determine the order in which tracks will play. 1 In stop mode press MODE. • If a group is selected, press B or ENTER to go on to the track selection screen. Press K or Lto choose a track, then press PLAY or ENTER. • If a track is selected, press PLAY or ENTER to start playing tracks. Starting from the one you've just chosen the subsequent tracks will be played. • Choose FIRST PLAY to start playback from the beginning of the listed tracks. • Press TITLE to return to the first item. • The PROGRAM screen 2 Press STOP to stop playback. will appear. 2 Press ▲ or ▼ to select a 0:03:30 track, then press ENTER. • Press CLEAR to erase the most recently entered program. 3 Press PLAY to play the programmed tracks. NOTES: • While the program is being played back, the STOP works as follows. • Press STOP once and then PLAY again, playback will restart from the point where STOP was pressed. (Program continued) • Press STOP twice and then PLAY again, playback will restart from the track in the usual way. (Program cleared) • Up to 99 programs can be entered. • If you like to repeat the current track in the program, press REPEAT repeatedly until TRACK appears during playback. If you like to repeat the entire program press REPEAT repeatedly until ALL appears during playback. NOTES: • Folders are known as Groups; files are known as Tracks. • MP3 files are accompanied by 3 icon. • Maximum of 255 folders can be recognized. • Maximum of 256 files can be recognized. • Up to 8 hierarchies can be created. This player recommends the use of files recorded at the below specifications: • Sampling frequency: 44.1kHz or 48kHz • Constant bit rate: 112kbps ~ 320kbps. On-Screen Information MP3 You can check the MP3 files during playback. 1 Press ONSCREEN. • The name of the file currently in play will be displayed. 2 Press ONSCREEN again to show the track num- ber, the elapsed time, the repeat status, and the playback status at the top of the screen. • will be displayed when the repeat play has been selected. T - indicates Track repeat G - indicates Group (folder) repeat A - indicates Disc repeat 3 Press ONSCREEN again to exit. - 12 - EN