Sharp DX-C401 DX-C311 DX-C401 Operation Manual - Page 43

INTERIOR (12) BEFORE USING THE MACHINE (13) (14) (15) (16) (17) Toner collection container removed and main charger cover open (18) (19) (20)(21) (22) (23) (24) (25) (12) Developer cartridges This contains the developer that is necessary to transfer the toner to the paper. When replacing the drum cartridge, the developer cartridge must be removed before the drum cartridge is replaced. ☞ Maintenance & Safety Guide (13) \Drum cartridges This contains the photosensitive drum that is used to create images for copying and printing. ☞ Maintenance & Safety Guide (14) Toner cartridges These contain toner for printing. When the toner runs out in a cartridge, the cartridge of the color that ran out must be replaced. ☞ Maintenance & Safety Guide (15) Fusing unit Heat is applied here to fuse the transferred image onto the paper. Caution The fusing unit is hot. Take care not to burn yourself when removing a paper misfeed. (16) Right side cover Open this cover to remove a misfeed. ☞ 8. TROUBLESHOOTING "REMOVING MISFEEDS" (page 8-2) (17) Paper reversing section This is used when 2-sided printing is performed. Open this part to remove a paper misfeed. ☞ Maintenance & Safety Guide (18) Main charger cover Open this cover to clean the main charger. ☞ Maintenance & Safety Guide (19) Primary transfer belt unit The images created on the drum cartridges are combined into a single image and transferred to the secondary transfer roller unit. ☞ Maintenance & Safety Guide (20) Toner collection container This collects excess toner that remains after printing. ☞ Maintenance & Safety Guide (21) Toner collection container release lever Turn this lever when you need to release the toner collection container lock to replace the toner collection container or clean the laser unit. ☞ Maintenance & Safety Guide (22) Secondary taransfer roller unit The image that was transferred from the primary transfer belt unit is transferred to the paper. ☞ Maintenance & Safety Guide (23) Paper tray right side cover Open this to remove a paper misfeed in trays. ☞ 8. TROUBLESHOOTING "REMOVING MISFEEDS" (page 8-2) (24) Right side cover release lever To remove a paper misfeed, pull and hold this lever up to open the right side cover. ☞ 8. TROUBLESHOOTING "REMOVING MISFEEDS" (page 8-2) (25) Remove this cover to replace the ozone filter 1-4 Contents