Sharp EL1611P EL-1611P Operation Manual - Page 13

Resetting The Unit - ink

Page 13 highlights

PRINTING SECTION Printing speed: Approx. 1.4 lines/sec. (Printing speed changes slightly depending upon the printing digits per line.) Printing paper: 57 mm (2-1/4") - 58 mm (2-9/32") wide 80 mm (3-5/32") in diameter (max.) Operating temperature: 0°C - 40°C (32°F - 104°F) Power consumption: 6V (DC): 1.7 W Dimensions: 96 (W) × 191 (D) × 40 (H) mm 3-25/32" (W) × 7-17/32" (D) × 1-9/16" (H) Weight: Approx. 315 g (0.69 lb.) (with batteries) Accessories: Ink roller × 1 (installed), Paper roll × 1, Dry battery (R6) × 4 and Operation manual RESETTING THE UNIT Strong impacts, exposure to electrical fields, or other unusual conditions may render the unit inoperative, and pressing the keys will have no effect. If this occurs, you will have to press the RESET switch on the bottom of the unit. The RESET switch should be pressed only when: • an abnormal event occurs and all keys are disabled. • you install or replace the batteries. Notes: • Pressing the RESET switch will clear the stored tax rate and other data stored in the memory. • Use only a ballpoint pen to press the RESET switch. Do not use anything breakable or anything with a sharp tip, such as a needle. • After pressing the RESET switch, press to make sure that "0." is indicated. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

11
RESETTING THE UNIT
Strong impacts, exposure to electrical fields, or other unusual
conditions may render the unit inoperative, and pressing the
keys will have no effect. If this occurs, you will have to press the
RESET switch on the bottom of the unit. The RESET switch
should be pressed only when:
an abnormal event occurs and all keys are disabled.
you install or replace the batteries.
Notes:
Pressing the RESET switch will clear the stored tax rate and
other data stored in the memory.
Use only a ballpoint pen to press the RESET switch. Do not
use anything breakable or anything with a sharp tip, such as
a needle.
After pressing the RESET switch, press
to make sure
that “0.” is indicated.
PRINTING SECTION
Printing speed:
Approx. 1.4 lines/sec. (Printing speed
changes slightly depending upon the
printing digits per line.)
Printing paper:
57 mm (2-1/4") – 58 mm (2-9/32") wide
80 mm (3-5/32") in diameter (max.)
Operating temperature:
0
°
C – 40
°
C (32
°
F – 104
°
F)
Power consumption:
6V
(DC): 1.7 W
Dimensions:
96 (W)
×
191 (D)
×
40 (H) mm
3-25/32" (W)
×
7-17/32" (D)
×
1-9/16" (H)
Weight:
Approx. 315 g (0.69 lb.) (with batteries)
Accessories:
Ink roller
×
1 (installed), Paper roll
×
1,
Dry battery (R6)
×
4 and Operation
manual