Sharp FO-2081 Startup Guide

PRINTED IN CHINA

2011D

KS1

TINSE2164QSZZ

DIGITAL MULTIFUNCTIONAL SYSTEM

START GUIDE

MODEL: FO-2081

This guide explains how to install the machine, and indicates important points to note for installation and usage. Read and understand this guide to ensure

that you install the machine correctly. The Operation Guide for the machine is on the accompanying CD-ROM. The procedure for viewing the guide is

explained in "How to use the operation guide". After installation, read the Operation Guide to make full use of all the machine has to offer.

POWER ON

About the scan head

The scan head lamp remains on constantly when the unit is in the ready

condition (when the start (

) indicator is illuminated).

The unit adjusts the scan head lamp periodically to maintain copying quality.

At this time, the scan head moves automatically. This is normal and does not

indicate unit trouble.

CONNECTIONS

CONNECTING THE TELEPHONE LINE CORD

Plug one end of the telephone line cord into

the jack on the machine marked "LINE." Plug

the other side into a standard (RJ11C) single-

line telephone wall jack. Be sure not to plug

this telephone line cord into the "TEL" jack.

The "TEL" jack is used to attach an extension

telephone or answering machine to the

machine. (See "CONNECTING OTHER

DEVICES")

FINAL PREPARATIONS

CONNECTING OTHER DEVICES

If desired, an answering machine or external telephone can be

connected to the machine through the telephone jack, labeled

"TEL," on the rear of the machine.

•

Connecting an answering machine to the machine allows you to

receive both voice and fax messages when you are out. To use

this feature, first change the outgoing message of your answering

machine, and then set the reception mode of the machine to

"A.M." (Answering Machine mode) when you go out.

Comments:

1.It is advisable to keep the length of the message under 10 seconds. If it is

too long, you may have difficulty receiving faxes sent by automatic dialing.

2.Your callers can even leave a voice message and send a fax message on

the same call. Modify your outgoing message to explain that this can be

done by pressing their [START] key (

) after leaving their voice

message.

•

You can connect an extension phone to the machine to make and receive

calls like any other extension phone on your line. Even if you pick up the

extension phone and hear a fax tone, the machine will automatically cut in

and take over the line. Note, however, if you also have a PC modem on the

same line, you must turn on the Remote Reception function, and

deactivate the Fax Signal Receive function. See "SETTING UP THE

MACHINE FOR USE WITH A PC MODEM" (p.37) and "USING THE

REMOTE RECEPTION FUNCTION" (p.38).

ABOUT THE OPERATION GUIDES

The operation guides for the machine are as follows:

Start Guide (this manual)

This manual covers the procedures for setup and the safety relations.

Operation Guide for machine (on the FO-2081 Operation Guide

CD-ROM)

Explains the machine and how to use it as a copier. Also explains how to use

the machine as a printer and scanner for your computer.

Operation Guide for fax (on the FO-2081 Operation Guide CD-

ROM)

This manual explains the procedures for using the machine as a fax

machine.

This manual only explains the fax functions of the machine. For general

information on using the machine, including safety information, installation,

paper loading, removal of paper misfeeds, and peripheral equipment, see

the operation guide for the machine.

How to use the operation guide

Detailed explanations of the functions that can be used on the machine are

provided in the Operation Guide in PDF format.

If you use the unit in a country other than the country where the

unit was purchased, you will need to make sure that your local

power supply is compatible with your model. If you plug the unit

into an incompatible power supply, irreparable damage to the

unit will result.

1

Ensure that the power switch of

the unit is in the "OFF" position.

2

Turn the power switch on the left

side of the unit to the "ON"

position.

If your area experiences a high incidence of lightning or power

surges, we recommend that you install surge protectors for the

power and telephone lines. Surge protectors can be purchased

from your retailer or at most telephone specialty stores.

OFF

ON

LINE

TEL

If you are using distinctive ringing with an answering machine,

you do not need to follow the procedure described below.

(Please note that when distinctive ringing is used, the

answering machine must be distinctive ring compatible.)

The Remote Reception function is initially set to "ON".

1

Insert the supplied CD-ROM into

your computer's CD-ROM drive.

2

Display the contents of the CD-

ROM, and open the Operation

Guide file.

Operation Guide

CD-ROM

Manual

US_English

Operation

Guide file

(PDF)

* To view the Operation Guide in PDF format, Adobe

®

Reader

®

or

Acrobat

®

Reader

®

of Adobe Systems Incorporated is required.

Adobe

®

Reader

®

can be downloaded from the following URL:

http://www.adobe.com/

SPECIFICATIONS

*1

When making multiple duplex copies, the copy speed will vary based on

the environment conditions.

*2

First copy time may vary depending on the status of the machine.

*3

The warm-up time may vary depending on the ambient conditions.

*4

Not including TD and drum cartridges.

Printer Function

Scanner Function

Facsimile Function

250-sheet paper feed unit (MX-CS10)

Model

FO-2081

Type

Digital Multifunctional System, Desktop

Photoconductive type

OPC drum

Document glass type

Fixed

Copy/printing system

Dry, electrostatic transfer

Originals

Sheets, bound documents

Originals size

Max. 8-1/2" x 14" (A4)

Copy size

Max. 8-1/2" x 14" (A4) Min. 5-1/2" x 8-1/2" (A5) Image loss:

Max. 11/64" (4 mm) (leading and trailing edges)

Max. 3/16" (4.5 mm) (along other edges in total)

Max. 1/4" (6 mm) (trailing edge of the second copy of two-

sided copying.)

Copying speed*

1

20 copies/min. (8-1/2" x 11" (A4) one-sided copying at 100%

copy ratio)

Continuous copy

Max. 99 copies; subtractive counter

First-copy time*

2

8.0 seconds (When user program 24 is set to OFF) 10.7

seconds (When user program 24 is set to ON)

(paper: A4,

exposure mode: AUTO, copy ratio: 100%)

Warm-up time*

3

Approx. 0 sec.

Copy ratio

Document glass: Variable: 25% to 400% in 1% increments

(total 376 steps)

Fixed preset: Inch system: 25%, 50%, 64%, 78%, 100%,

129%, 200%, 400%

AB system: 25 %, 50 %, 70 %, 86 %, 100 %, 141 %, 200 %,

400%

RSPF: Variable: 50% to 200% in 1% increments (total 151

steps)

Fixed preset: Inch system: 50%, 64%, 78%, 100%, 129%,

200%

AB system: 50 %, 70 %, 86 %, 100 %, 141 %, 200 %

Exposure system

Document glass: Moving optical source, slit exposure

(stationary platen) with automatic exposure function RSPF:

Moving original

Paper feed

One automatic feeding paper tray and one optional paper tray

(250 sheets each) + bypass tray (50 sheets)

Fusing system

Heat rollers

Developer system

Magnetic brush development

Light source

Tri-color CCD light source (CCD: 3 components; R, G, and B)

Resolution

Scan: 600 x 300 dpi Output: 600 x 600 dpi (AUTO/TEXT mode)

Scan: 600 x 600 dpi Output: 600 x 600 dpi (PHOTO mode)

Gradation

256 tones (8 bits)

Power supply

Local voltage ±10% (For this copier’s power supply

requirement, see the name plate located on the back of the

unit.)

Power consumption

Max. 1.0 kW

Overall dimensions

(with bypass tray folded)

31-5/8" (W) x 18-1/8" (D)

(802 mm (W) x 460 mm (D))

Weight*

4

Approx. 42.1 lb. (19.1kg)

Dimensions

20-3/8" (W) x 18-1/8" (D) x 14-3/4" (H)

(518 mm (W) x 460 mm (D) x 376 mm (H))

Operating conditions

Temperature: 50°F to 86°F (10°C to 30°C),

Humidity: 20% to 85%

Noise level

Sound power level

L

w

Ad

Copying mode: 6.7 B

Standby mode: -

(

*

)

Sound pressure level

L

p

Am

(reference) (Bystander positions)

Copying mode: 51 dB

Standby mode: -

(

*

)

(*) = Less than background noise

Noise emission measurement in accordance with ISO7779.

Print speed*

Max. 20 ppm (when printing on A4 size paper)

Resolution

600 dpi/300 dpi

Memory

128 MB

Emulation

PCL6

Installed fonts

PCL6 compatible 80 outline fonts and 1 bitmap font.

Interface

10 Base-T /100 Base-TX Ethernet, USB 2.0 (Full-Speed/Hi-

Speed compatible interface)

Interface cables

[USB cable] USB cable that supports USB 2.0. Please

purchase a commercially available USB cable. [LAN cable]

Shielded type cable: Please purchase a commercially available

LAN cable.

Type

Flatbed scanner

Scanning method

Document glass/RSPF

Light source

Tri-color CCD light source

(CCD: 3 components; R, G, and B)

Resolution

Basic: 600 dpi x 600 dpi

Setting range: 50 dpi - 9600 dpi

Original types

Sheet media, books

Effective scanning area

8-1/2" (Lengthwise) x 14" (Width)

(216 mm (Lengthwise) x 356 mm (Width))

Scanning speed

2.88 msec/line

Input Data

A/D 16 bit

Output Data

R.G.B 1 or 8 bits/pixel

Scanning colors

Black and white 2 value, Grayscale, Full color

Protocol

TWAIN WIA (Windows XP/Vista/7 only) STI

Interface

10 Base-T /100 Base-TX Ethernet, USB 2.0 (Full-Speed/

Hi-Speed compatible interface)

Drop out color

Yes

Supported operating

systems

Windows 2000 Professional/XP/Vista/7

Void area

None

Interface cables

[USB cable] USB cable that supports USB 2.0. Please

purchase a commercially available USB cable. [LAN

cable] Shielded type cable: Please purchase a

commercially available LAN cable.

Scanner utilities

Button Manager/Sharpdesk

Applicable telephone line

Public switched telephone network

Compression method

MH, MR, MMR, JBIG

Transmission modes

Super G3, G3 (the machine can only send faxes to and

receive faxes from machines that support G3 or Super

G3)

Scanning method

CCD flatbed scanning

Scanning resolution

(supports ITU-T standards)

8 x 3.85 lines/mm (Standard)

8 x 7.7 lines/mm (Fine, Fine + Halftone)

8 x 15.4 lines/mm (Super Fine, Super Fine + Halftone)

Recording method

Laser, electrostatic charge method

Transmission speed

33.6 kbps

2.4 kbps Automatic fallback

Transmission time

Approx. 2 seconds

(Super G3 mode / 33.6 kbps, JBIG),

Approx. 6 seconds

(G3 ECM mode / 14.4 kbps, JBIG)

Paper size

8-1/2" x 11"(Letter), 8-1/2" x 14"(Legal), or A4

Effective recording width

8-1/2" max. (8-1/2" x 14" printing)

Transmittable original size

When using the RSPF

Maximum

One-sided original: 8-1/2" x 19.7"

Two-sided original: 8-1/2" x 14"

Minimum

8-1/2" x 5-1/2"

When using the document glass

Maximum 8-1/2" x 14"

Effective scanning width

8-1/2" maximum

Halftone transmission

256 levels

Contrast (exposure)

adjustment

Light, Medium, Dark

Extension telephone

connection

Possible (1 telephone)

Auto dialing

Combined total of 18 One-Touch Dial and Group keys;

100 Speed Dial numbers; redialing (automatic)

Timer transmission

Yes

Automatic document

feeding

Yes (50 pages)

Memory capacity

2 MB

Error Correction Mode

(ECM)

Yes

Paper size

5-1/2" x 8-1/2" to 8-1/2" x 14" (A5 to A4)

Paper weight

15 lbs. to 21 lbs. (56 g/m

2

to 80 g/m

2

)

Paper capacity

One paper tray with capacity for 250 sheets of

80 g/m

2

bond paper

Weight

Approx. 6.6 lbs. (3 kg)

Dimensions

19-5/8" (W) x 17-1/2" (D) x 3-1/2" (H)

(498 mm (W) x 445 mm (D) x 88 mm (H))

Power supply

Drawn from the machine

As a part of our policy of continuous improvement, SHARP reserves

the right to make design and specification changes for product

improvement without prior notice. The performance specification

figures indicated are nominal values of production units. There may

be some deviations from these values in individual units.

Sharp FO-2081 Startup Guide

Sharp FO-2081 Manual

Sharp FO-2081 manual content summary: