Sharp FO-775L FO-775L Operation Manual - Page 137
Messages and Signals
View all Sharp FO-775L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Messages and Signals 11. Troubleshooting Messages and Signals Display messages Note: If you have turned on the Caller ID function, see Caller ID in Chapter 8 for display messages related to Caller ID. CHECK PAPER SIZE COVER OPEN DOCUMENT JAMMED FAX RX IN MEMORY FILM END FUNCTION MODE HOLD LCR DOWNLOADING DOWNLOAD ERROR The paper size setting is incorrect. Change the paper size setting as explained on page 23. The print compartment cover (under the operation panel) is open. Open the operation panel (grasp the top and pull toward you), and then press down firmly on both sides of the print compartment cover to close it. The original document is jammed. See the following section, Clearing Paper Jams. A fax has been received in memory because the imaging film needs replacement, you have run out of printing paper, or the paper is jammed. The fax will print out automatically when the problem is fixed. The imaging film may need replacement. Check the film and replace if necessary. The FUNCTION key has been pressed. The HOLD/SEARCH key has been pressed to put the other party on hold during a phone conversation. Press the HOLD/SEARCH again to take the other party off hold. The fax machine has called OpenLCR and is receiving carrier rate data. This message only appears if you have registered with OpenLCR. The fax machine was unable to download rate data from OpenLCR. Try downloading the data manually as explained in Downloading (receiving) the rate data manually on page 39. 135