Sharp FP-N25CX FP-N25CX Operation Manual - Page 14

OPERATION MAIN UNIT OPERATION Main Unit Controls • AUTO • SILENT • LOW • HIGH • QUICK AUTO • POLLEN MODE-ON/OFF Button AUTO SILENT LOW HIGH QUICK AUTO POLLEN CLEAN SIGN OFF TIMER h Plasmacluster Plasmacluster Indicator Light DETERMINING THE BASE IMPURITY RATE For the first 2 minutes after the power plug is inserted into the wall outlet, the unit will check the conditions of the air. If operation is set to ON during this time, the CLEANSIGN LIGHT will alternately flash in green, orange and red. The unit will start operating when the MODE-ON/OFF Button is pressed. To change operating modes, press the MODE-ON/OFF Button until the desired control is activated. Stop AUTO operation The fan speed is automatically switched (HIGH, LOW, SILENT) depending on the amount of odor in the air. The sensor detects the odor for efficient air purification. SILENT operation The unit will operate quietly using minimal air intake. LOW operation HIGH operation POLLEN mode operation The unit will operate at High fan speed for 10 minutes, then will alternate between LOW and HIGH. 10 minutes: High fan speed 20 minutes: Low fan speed 20 minutes: High fan speed QUICK AUTO operation The unit will operate at High fan speed for 10 minutes, then will operate in AUTO operation. 10 minutes: High fan speed AUTO operation E-12