Sharp HT-SL75 HT-SL70 HT-SL75 Operation Manual - Page 8

System preparation Make sure to unplug the AC power cord before installing the unit or changing the position. Select from three installation methods according to the preferred position. 1. Using stand (horizontal arrangement) For 52", 60" or 70" TV sound bar assembly Use Sound bar cover joint (short : 369 mm) For model for 60" TV. HT-SL75 Use Sound bar cover joint (long : 594 mm) for 70" TV. For model Use Sound bar cover joint (long : 188 mm) HT-SL70 for 52" TV. 1. Pull out both joint covers as below. 2. Place the two sound bars adjacent to each other and slot in the sound bar joint and its cover as below. Right Front side of the sound bar SOUND BAR HOME THEATER SYSTEM HT-SL70 Left To fix the sound bar stand 1. Peel off the double sided tape separator and attach the sound bar stand cushion at the bottom surface of the sound bar stand. Sound bar stand cushion Cover Sound bar stand Double sided tape separator Sound bar joint 2. Place the two sound bars near to each other and slot in the sound bar joint and its covers as below. Hook 2. Fix the sound bar stand as shown. Right Front side of the sound bar SOUND BAR HOME THEATER SYSTEM HT-SL70 Left For 46" TV sound bar assembly For model Use Sound bar cover joint (short : 55 mm) HT-SL70 for 46" TV. 1. Pull out the joint cover as below. Sound bar joint (short) Cover SOUND BAR HOME THEATER SYSTEM HT-SL70 SOUND BAR HOME THEATER SYSTEM HT-SL70 Note: Sound bar stand can be removed by pulling it off backward from the sound bar. Suggestion of the sound bars and LCD TV horizontal arrangement. E-7