Sharp HTSB200 HT-SB200 Operation Manual - Page 14
Speaker connections to TVs - 2 1 manual
UPC - 074000369399
View all Sharp HTSB200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
HT-SB200 Speaker connections to TVs Caution: Turn off all other equipment before making any connections. Tuner receiving for other audio system ● Placing the antenna near the speaker AC power cord may cause noise pick up. Place the antenna away from the speaker for better reception. Notes: ● To connect to TV, use either LINE IN 1 jacks or AUDIO LINE IN 2 jack only. ● Refer the operation manual of the equipment to be connected. ● Fully insert the plugs to avoid fuzzy pictures or noises. ■ Connecting to a TV If the TV/monitor has an audio output, connect it to the LINE IN 1 jacks on the rear of the speaker. TV ■ Connecting to a TV (with Headphone jack) If the TV/monitor has headphone jack, connect it to the AUDIO LINE IN 2 jack on the rear of the speaker. TV HEADPHONE To HEADPHONE jack Audio cable (3.5 mm/stereo jack) (not supplied) To AUDIO LINE IN 2 jack Preparation for Use 14 To audio output jacks RCA cable (supplied) To LINE IN 1 jacks Speaker LINE IN 2 RIGHT LEFT LINE IN 1 Speaker LINE IN 2 RIGHT LEFT LINE IN 1 Notes: ● If the TV volume is continuously in low level, the speaker will automatically power off. Increase the TV output volume to enjoy the sound from the speaker. ● If the speaker volume is continuously in very high level, the speaker will mute and recover after 3 seconds.